Search results

They arent top fueler forks. They only have a 30 degree bend not the 60 degree bend the top fuelers have. They are my repops.

I believe that is for Murray Eliminator.

I don't have anymore kits. You can take the template to a water jet cutter to cut the plates. They are 3/16th thick. Fork tubes you can get off ebay. 065 wall tubing will be much easier to press the ends for the wheel axle holes.

Nice Rail. It looks like it will clean up easy. Except the handlebars. They never had good chrome on them. That seat is hard to find without that GT 707 part broken. Cool score.

They might be $1000 dollar pedals.

🦶🚴‍♂️

Forgot to mention fork tubes are 3/4" x 120 wall. If making straight tubes you can use 065 walled tubing. You also need to use seamless tubing because seamed tubing splits when you press the ends. You need a 100 ton press to press the 120 walled tubing..... Yes 100 ton! LOL

Hey Chuck, I can do a few things for you. I can send you the plate info with the plate size and hole sizes off sets ect. The fork tube are bent to 60 degrees on a 7 inch center line radius. (7" CLR) I had a special die made for this. You can also use straight tubes to make a cool chopper fork. I...

Looking Good Brother. I found the decal for you. I sent a pm

An original Hangmans noose sissy bar should bring $1000 easy.

You cant buy rust! Leave it and buy a minty one to put next to it.

Never saw a Troxel seat get restored. Cool! 👍✌

Cool Forks 👍✌

The fender brace and drop stand are all together and come off the frame. From what I read it is 1937 frame used this set up.

Good thing the guy who worked at the dump knew enough to save them. He didnt know their value though. He had them posted for $100 Dollars for both. He was surprised when I paid the 100 and didnt bargain. Everyone was happy with the deal

Thanks. I found the headlight bezel on Ebay for a AMF Roadmaster Skyrider that looks the same.

Thank You for the info. 👍✌

I found these 2 bikes on Facebook last night. They were saved from the dump by the person I got them from. I am not sure of the 60's tank bike. I was thinking of the Jet bikes but couldn't find a matching pic. If you could put a name to these that would be appreciated. I found the same...

They are called California Chopper Forks. They are also called Whiz kid forks as they were on a bike in the movie The Whiz Kid. They can be remade.

Here is a 1952 Schwinn Phamton locking Springer fork with bearings and locking cups. It comes with 2 new brass keys from Wes Pinchot. Has the fender tab and bolt. $240 Shipped lower 48.

Here is a set of pedals off a 1952 Schwinn Phamton. Dirty, greasy, rusty. The pedals spin fairly easy but will need cleaning. $60 Dollars Shipped lower 48. PayPal F/F

Your bike is a 72 or 73. With the BMA sticker, fork reflectors is how to tell. Great score. A chainguard should not be hard to find.

If your looking at girls bikes I would keep a eye out for a Slik Chik model sting ray

Not a Lemon in the bunch. 👍

That chain guard is worth the 350. Someone is going to score on that deal.

Thanks Rob. Looking at the bike this morning with better light it looks to be repainted. You can see on the guard where they covered the writing. Bummer but still happy. First muscle bike I have seen with 36 spoke front wheel. The seat is soft and no rips. That was worth the 200 spent on it.

I just picked up this Rollfast built Firestone GTO Flame bike. It looks to be all original down to the tires. It has 36 spoke wheels front and back. Persons seat is in really nice shape. It's hard to make out the serial number as it was a weak stamping. The first 2 digits are 55. I am guessing...

I have a Ross Apollo seat. I can take pics of it in the morning and post them. Here are the pics. The paper bottom is shot. The rear reflector is cracked and some tears to the seat there. How is $70 Shipped lower 48

I can do $290 Shipped lower 48

That is my Ebay auction for the forks. I have a few sets left. I also have a set in cold rolled steel like the originals. They would need to be polished and chrome plated. That would be as close to NOS as you could get. I also have the decal.

Great Job on the restoration! That's a Keeper👍

One just sold on Ebay. It is a Bill Matthews California Chopper fork. AKA Whiz Kid fork.

Another pic

I dont have any pics of the red bike. I found this AMC Thunderball pic on line though.

The left rear drop out has the serial number. The paint has probably filled in the letters and numbers. You will have to wire wheel the drop out to find the serial number. If your trying to save the red paint just clean the green paint off and you will probably see the numbers. I believe I had a...

Yes it's a 1996 Suzuki Carry. Lifted with new tires.

I turned this 71 Typhoon into a Typig bike. I changed the seat, sissy bar, handlebars and rear slik. Since it is a short frame I built it as a Stingray Jr with a 15 inch seat and short handlebars.

I need a Schwinn banana seat 15 inch size Not the 18 inch. I would like color of green, silver, white or black. Let me know what you have. Thanks.

I would like to buy this bike. I can have my cousin pick it up for me. Let me know how to pay you. Thanks!

They are called California Chopper Forks. They are aftermarket. Cool score.

Hey Guys, I am still around and alive. I have put bicycles on the back burner for a few years now. I have the plates and tubes for the forks. I need to find a good tig welder to help me. The metal still needs mirror polish before welding. I will try to get them made before the end of summer. If...

Prewar braced handlebars 21 inches wide 9 inch pull back. $85 Dollars Shipped.

That is a Huffy Slingshot Twin Stick. That is the most wanted Huffy Rail bike besides the mag wheel version. It needs correct handlebars pedals seat sissy bar. A twin stick shifter sold for over 500 dollars in the last 6 months.

Here is a set of Screamer handlebars and a mini set I had welded up like in my member pic.

Sorry to say these are not Pretzel handlebars and they are Not Sears Screamer handlebars. They are from a Sears Spyder bike. Still very cool handelbars and a good price.

Jammer is correct. It goes on a Sears Screamer. Value can go high on these. Nothing less then 100 dollars. 200 dollars or more if you need it.

Go to pedalcarsandparts.com Ask Dan Portel about your car. He will know what it is or isnt.

Pretzel bars run from 250 to 400 now. They pop up every once in awhile.