Search results

$155 shipped The cages on these smaller Rat Trap pedals are straight and the bearings roll smooth, but could use a little lubing by the new owner. As you can see, they're uncleaned ( as found ) and could be made more presentable with some polishing. The threads are clean and they measure 4...

$190 shipped This men's, early 1900's seat measures 10 inches long ( not including the snout spring in the front ) x 7-3/4 inches at its widest point. It consists of wood, horsehair and leather with that spring undercarriage. Stem hold down bracket included. The leather is intact, but needs...

# 1 Frame only ( no cranks or chainring ) $135 shipped #2 Locking fork complete $135 shipped #3 Four hole carrier $45 shipped #4 Deluxe chain guard $35 shipped #5 Heavy spring seat pan $60 shipped ( rims, crank / chainring, pedals, handlebars / stem ) are not being sold until I can clean...

$100 shipped These interesting bars are in very good original nickel and are straight with no dents, but some light pitting, scuffs and scratches as shown in the magnified pics. Camera's pick up everything and it's then magnified......:( They measure 25-1/4 inches wide ( from the outer edge of...

$40 shipped This stem is solid with about 50% nickel present as seen. There is also some pitting where the plating is worn away as shown. It measures slightly over 3/4 inches diameter in the stem area. ( PM's answered ) Port Washington, WI 53074

$100 shipped These fenders are solid with the flat fender braces and have a nice, deeper profile as shown. The paint has been stripped off at one time to reveal a dark, bare steel that's actually a cool look for the right bike! There are some shallow dents here and there on both fenders, that...

$75.00 shipped This quality hub was manufactured by the Eclipse Machine Company. Made in Elmira, NY, U.S.A. It's also stamped G2 ------- 36-13. It appears to be from the 1930's because of the chrome plating. The hub works great and the bearings run very smooth. It could use some oiling...

$55.00 Shipped This 56 link chain is strong with some very light surface rust here and there, that can easily be cleaned up and oiled. There is also some light, outside wear on a couple links ( gouges that are magnified by the camera ) as seen in a couple of the pics.( minor ) The D.I.D...

$48.00 shipped Find a nice seat pan to bolt on and there 'ya go! There's some surface rust with caked up areas as shown and could be cleaned up or repainted if desired. They measure 10 inches long x 8-1/4 inches wide x 6 inches high. ( PM's answered ) Port Washington, WI 53074

$595.00 shipped This unusual, 28 inch wood wheel frame appears to have had a decal on the head tube at one time, rather than a badge, because there are no holes present that I can see. It's also possible that this frame might have been manufactured by the hygienic Wheel company I was told, but...

$90.00 shipped These bars are straight with no dents, but as you can see, there's much plating wear with some minor pitting to the cross brace. They measure 20-3/4 inches long ( from the outer "grip" area, edge to edge ) x 9 inches deep ( from the outer edge of the stem area to the edge of the...

$85.00 shipped This cabinet's in very good original condition with a nice rich color & graphics as shown. It measures 14-1/2 inches long x 7-3/8 inches high x 4-1/4 inches deep. ( Pm's answered ) Port Washington, WI 53074

$50.00 shipped This hub is in good shape with some pitting and wear to the chrome plating, as shown. The hub runs smooth with good bearings. > This would be a nice hub for that original condition bicycle < ( Pm's Answered ) Port Washington, Wi 53074

$75.00 shipped This set is in very good condition for it's age and came off of a wood rim bicycle I parted out at one time. There is light pitting and wear to the plating, but still displays well. Bearings / cups, nuts, washers included as seen in the pics. It almost appears to be an ( "M"...

$50.00 shipped This badge is in good shape with great patina as you can see! It says Chicago Cycle Supply Co., Chicago U.S.A It measures 3-1/4 inches long and the hole spacing is 2-3/16 inches ( center to center ) ( PM's answered ) Port Washington, WI 53074 ( sorry, not all pics are clear...

$ 80.00 shipped I was told it may be Snyder / Huffman built by the prior owner. You be the Judge!! This tank is solid and has been bead blasted at one time. Some surface rust has accumulated from being stored, since then. I ran my finger over the darker side and I feel a few very shallow...

$40.00 shipped This pair of stainless steel, Ford hubcaps have that cool retro appearance and are in good shape for their age. There's some scratches, a few dents here and there, etc., as shown, but nothing major. Use 'em for "Wall Art" , "Clock Faces" or on your favorite Classic Ford. Use...

$85.00 shipped This heavy profile, 28 inch wood rim has that inner steel band to accept clincher type tires. The rim is straight and sports a New Departure model A hub. The arm is missing as shown, but can easily be found. The finger joints are fairly tight with the one chip out on one side...

$150.00 shipped This set of 26 inch enders are in very good to excellent original condition with only minor shelf wear ( scuffs, a couple of scratches, etc. ) They are still in the original, tattered wrapping as shown. This is actually the first time I've had them out of that wrapping they...

$85.00 shipped These original paint fenders are straight & solid, but do have the usual wear and tear that happens through the years. The front fender has a few dents that could be tapped or rolled out and the rear has one dent at the rear. There's also some wear and tear to the paint as...

$225.00 shipped This bicycle is in as found condition. The only thing I've cleaned is the back rim to expose some of the chrome. It appears to be mostly original, even though I confess I don't know much about these cool, later kids bikes. As you can see, there's quite a bit of rust here and...

$795.00 shipped ( She's also listed on the Bay for much more $$ ) Here's a original Sturmey / Archer hub & shifter, mounted on a straight 28 inch wood rim I've had a long time. These were usually found on most Chief Motorbikes and a few other teens bicycles here and there as an option. This is...

What have you?? I need a pair of bars similar to the ones shown in the pics for a project bike, I'm working on. ( 1893-94 Columbia ) I'm not sure what diameter stem is needed. My bicycle is packed away in deep storage because of a recent move! :( You guys would know!!..........I do have a set...

$235.00 shipped These very hard to find bars are quite wide at 28-1/2 inches from edge of the grip end to the the other and are 6-1/2 inches deep from the edge of grip end to inside of the the bars themselves. They have a small diameter stem at a tad over 5/8 inches. (I don't have a micrometer...

~~~~~~~ This elegant bicycle has that earlier, " primitive " appearance. The frame is straight with no repairs. it's missing one original grip, pedal, plunger brake assembly and seat. The original 28 inch front rim is warped, but still retains it's original hub. It still displays well though...

$595.00 shipped These early, 28 inch rims are quite straight and have tied spokes with 36 holes each. They also have the same profile and are narrower than most, but I'm not sure what brand bicycle these came off of ( Columbia, Victor, Spalding, etc.?? ) Someone will know.....The rear hub is...

> $995.00 shipped < I've seen this interesting fork used on some earlier Daytons. " Davis sewing Machine Co "or maybe some other brands as well. The fork is completely nickel plated under that red house paint with the heavy iron spring being a darker metal. That nickel plating has been lightly...

$65.00 shipped This lamp is solid and straight with only one very shallow dent in the painted cover, that's not noticeable. There is also one dent to the plated outer lens ring at ( one side only ) that could be tapped out. There's the usual light overall wear and tear to the paint on the top...

$85.00 shipped This seat measures 11 inches long x 9-1/2 inches wide. It does have the usual wear and tear to the vinyl cover as shown, but overall is a strong, rideable condition seat. The heavy spring undercarriage is solid with no breaks or repairs. ( PM's answered ) Port Washington, WI 53074

SORRY ~ ( I decided to part out in this thread, Instead of selling whole ) ( " Blue Grass" Motorbike for Parts: ) Available > Project Motorbike Frame ~ Fork ~ Head badge ~ Chain Ring & cranks > $250.00 shipped > SOLD < Diamond Chain ( 55 links ) > $40.00 Shipped > SOLD < Heavy spring...

$650.00 shipped This bicycle is all original, except for the "house paint" over the original cobalt blue, that was done years ago by some artist.... They did preserve the original "Iver Johnson" script though on the down tube as shown. I did a strip to that cobalt blue on a very small section...

$450.00 shipped Pics aren't the best, but these bars are straight with some minor pitting in areas and have about 50% plating wear. They have been polished up at one time by a prior owner ( fair job ) and still could be polished up much better if desired.They still look good though, for that...

> Spring fork only ~ $95.00 shipped Original blue paint on fork is in good overall condition with some light surface rust & scratches as shown. The spring is solid with no breaks or repairs. ( PM's answered ) Port Washington, WI 53074

$115.00 shipped This seat is in very good original condition with only one very small tear in the center as shown and a couple of scuffs. It measures 18 inches long and is marked Persons, made in USA. The undercarriage has some minor surface rust here and there also, as seen. The 28 inch long...

$75.00 shipped This stand fastens to the chain stays and hub axle. It's complete and in very good original condition as shown ( mounting bracket included ) It measures 16 inches from the center of the axle hole to the tip of the stand ( laying flat on a table, face down ) ( PM's answered )...

PENDING > (2) Deluxe chain guards package ~ former Phantom / Panther ~ $65.00 shipped Both guards have been house painted with the Panther guard having one dent as shown. Could be bead blasted to bare steel for that "Rat Rod" appearance or used in a restoration for your Classic, project...

$150.00 shipped This hard to find, deep (1 inch side ) front fender is straight & solid with only one small notch - out with shallow denting in one area along the bottom edge on one side, as shown. This can be filled in easily, if desired, in a restoration. There are no fender braces included...

Parts: PENDING Spring fork only ( with cups and bearings included ) > $115.00 shipped Chainring & cranks ( with cups and bearings included ) > $35.00 shipped > Frame is ( SOLD ) Serial number C36400 ( 1952 or 53 ) This funky house painted frame was a former green " Panther " with the...

$80.00 shipped An asset in your hub repair toolbox. (PM's answered ) Port Washington, WI 53074

$215.00 shipped This funky , house painted tank is very straight with some light pitting and scratches to the chrome plating as shown. The plating could be cleaned and polished up better. I just gave it a light wash. The horn / battery unit is missing as well as the original screws.These can be...

$60.00 shipped This interesting rear reflector is in very good original condition overall. It does have some chrome plating wear, scratches to the red "Stimsonite' reflector, scratches to the celluloid ring as well as the aluminum outer ring as shown. The backside has some surface rust also as...

$85.00 shipped This siren is in very good to excellent original condition as shown. " push the plunger / hear the loud siren sound! " :cool: ( PM's answered ) Port Washington, WI 53074

$60.00 shipped This lamp is straight with no dents, but there is some battery corrosion to the bottom that doesn't really show, when mounted. The original paint has light wear and tear overall with the plastic lens still intact as shown. There is caked rust on the battery holder inside as...

This Tank is straight with no dents, but does have the usual wear and tear to the original paint as shown. The green paint is slightly darker than what it appears in the pics also. The complete horn unit is missing and the inside has some surface rust only ( no battery corrosion ) The original...

Out of curiosity, what's the exact date of the upcoming bicycle swap in Green Bay, WI in August or September?? I've never been to that one and might be interested in attending. 'ya never know. There might be a large & enjoyable crowd of bike guys & gals there! ;)

For parts or ( $745.00 shipped whole ) Interesting colors :cool: > Frame with serial # F049084, fork, cranks & chainring, seat post with all bearings included ( $130.00 shipped ) > Beautiful " Liberty " head badge ( $90.00 shipped ) > Wide fender set - straight with a couple of small dents...

> $245.00 shipped < These bars are solid and appear to be hickory or elm wood. ( They are unfinished and could be stained and varnished to make them really pop! ) I gave them a quick, light sanding / polishing and left the grip ends rougher, to about 3-1/2 inches in from the end, for the grips...

> $50.00 shipped < ( Back up for sale ) These smaller bars are straight and in very good condition overall. They appear to have been restored in "chrome plating" at one time and have light wear and tear ( a couple of very small dents, some plating wear and light pitting ) as shown. They have...

> $140.00 shipped < I took this stand off of a Monarch Silverking from the thirties, but I'm sure it would fit a variety of bikes though from that time period. This drop stand is straight and solid with minor wear and tear. It has been painted a light coat of silver at one time in the past...

> $95.00 shipped for all < These deep, red glass reflectors come in various sizes as shown. There are a couple of them that are scratched, but still have an acceptable, appearance to them. The others are in better condition as shown. There's also a couple of smaller ones that might have been...