Search results

A blast from the past...I restored this one some 20 odd years back. Still looks fresh, looks like this could have been resto'd last week, paint, chrome, cad, everything held up, doubt it was ever ridden. NOS Typhoon USA tires still have all the nubs. Original parts restoration Only repro parts...

Nice old prewar deep pan long nose Troxel prewar saddle fully restored and with a completely $rechromed$ Bell cup chassis! Nice one for a variety of exotic Schwinn bikes, Colson, CWC, Elgin etc etc.... Black leather with white accent on the binding stitch! 300.00 shipped [email protected] or...

Cleaned a few key areas on each pair...revealing...YES these will chrome plate just fine. However...ain't no og chrome comin' back yo on these! They are however straight, not dented or bent and the very widely applicable late 1930s through early post war Torrington bars that were stock on a...

1st pic.....top 3 are Wide Deep profile with the Schwinn 34-late 30s width/dimensions... the rear fender is VERY similar to a 1936 Cycle plane wide profile fender and fits the prewar Non Double Diamond but 36' and up Schwinn frame perfectly... I believe the brace hole spacing is the same. With...

Looks to be partial repro stuff and original, maybe 50/50? Don't know for sure... not bad tho. not like the crappy import lowrider ones that litter the earth. Needs S bolts to be a million times better, replace generic carriage ones. 75.00 plus ship! [email protected] or PM here

Purchased at auction.... untested! Decent looking original drop center has some ones initials (very small) on one side, other than that decent rim! Plus the random array of Bendix 2 speed postwar hubs in varying "for parts" condition... 100.00 plus the ride! [email protected] or PM here

Here's an early and Odd with NO date Morrow hub heavy duty 105 gauge spokes... just no date stamp on this one! Wheel is straight and not OD paint but looks like a possible good candidate for G519 OR Cycle Truck! Nice sound solid rear drop center...original as found 150.00 plus the ride...

Chain guard in orig maroon/ ivory paint...not a bad puppy ...some minor dents in the embossed area, small crank swipe on back of quality seal circle not noticeable from viewing side...front clamp is a bit misshapen...needs some TLC straightening, has an NOS bracket, haven't messed with it...

NOTE—- tank half not available Check this load! 2 NOS 95' Schwinn orig repop 4 hole tops...not the cheap new crap out, variety of cranks including a 1935 dated LADIES and one other prewar ladies schwinn crank.. 1 rough rear brake expander hub, frozen...free wheel hub shell no guts. Unusual...

Check the pix! assorted stuff...used discs... 2 NOS clutch springs and mechanism, NOS black out shifter lever for 2 speed. 1 2spd driver and one Triple speed driver, 1" pitch sprocket for 2 speed, NOS 2speed brake lever, NOS dust cover, rechromed standard ND shell 36 hole (not DD stamped)...

check out the chrome Tail light seat option... cool bags too... 595? maybe not...but a looker! https://www.facebook.com/marketplace/item/2431355113919185/?ref=search&referral_code=null&referral_story_type=post&tracking=browse_serp%3A472a4cfc-3584-4d10-aa7f-9722f274d2ba

Might have accidentally deleted a message from ? looking for a front truss fork early postwar fender light fender and locking truss. have both here... PM me thx

Need a straight original paint 9 hole rear Schwinn carrier Prewar Variety.. send pix with price. Nice shape or good orig paint thx!

Restored Prewar/wartime Persons saddle for the WWII military Dayton & Westfield machines. Chassis on this one is slightly narrower than the commonly found 1" 1/8 on these bikes measuring just under 1" width. Seat was completely disassembled stripped and painted in the OD, Covered in Leather...

Here's an odd one... Long spring chassis, don't see this version often without the front Nose Coil...mounts the way a Lobdell Horizontal sprung seat mounts.. Very different. Top looks to be restored, nice job, has patina, no idea who did the work. 2 pan saddle sold as-is as found! 150.00...

Price drop...both bars! or best offer on both? Wide profile (not the super wide) early shim style I believe Torrington steerhorn bars...patina...no dings or deep pitting, early set! Nice htf 60.00 plus the ride....Now 45.00!!! [email protected] or PM here NOS Torrington G519 bars...

Fenders lots as shown / described PREWAR Batch #1 Sold! #1. Prewar Schwinn batch. 1st pic--- Top to bottom...decent useable 1941 Truss fork Fender light fender, repainted... under that 2nd down, rear 37-38 profile rear with heavy repair underneath ...brass? on the outside it's not...

Variety of various Cranks including a nicely rechromed 40s-50s balloon 26" Schwinn crank and Whizzer 4 hole sprocket, the others are orig as found, (far right top pic). There's a Peaked or gothic profile straight arm crank stamped SA ...? a late 70's dated 20" crank for Schwinn, and an unknown...

Must take all... these are as found...I think a few might clean up ok! 2 piece 40's era Schwinn tandem / new world etc, standard 40s-50s Schwinn 4 hole skip (top left)...Middle row left is a 41 crusty Schwinn prewar dog leg, deep pitting there ..Columbia postwar, Elgin Prewar, Colson Tandem...

Here's a load of sprockets for the d or nd. The 4 hole Schwinn I believe is a Whizzer one...slightly smaller than the the standard 4 hole skip tooth sprocket. Sold as is...will ship as economically as possible most likely Prio mail med flat rate around 18.00 bux

Fork lot / load as shown... most are 26" if not all, the Schwinn fork far right has had some threads trimmed looks like. Most have good threads and the legs are relatively straight. There was a date on one of the 20" Stingray type forks 818 looks like, the blue 20" had no date or buried under...

3 Schwinn prewar truss forks. The blue ladies fork is nice and straight could easily be cut down to mens frame length. The other tall ladies is a bit rougher with a repair on the tube. There is a mens 26" fork with a Crack on one leg, see close up. 2 nice straight Powdercoated? black post...

Full size Troxel Saddle...tempted to restore this one but if 150 and it can be used as-is then away it goes. Some outer fabric loss, but overall hanging in there as shown. Full size mens saddle for 26" and 28" bicycles. Nice relic seat! 150.00 plus the ride [email protected] or PM here

Lots of patina on these...but very well made pedals easily 100 years old. Spin straight, original worn blocks... NICE for that early Motobike Wood wheeled antique bicycle! 150.00 plus the ride [email protected] or PM here

Many flavors here... Town and country pair, Repop? Phantom guard, Super straight but with patina Whizzer/DX/early Straight bar feather guard... Typhoon guard and hockey stick chrome plated Lightweight or middleweight guard. All in the pix for the one price 100 plus shipping [email protected]...

Check pix...I also have another extra guard included similar to the top 2 western flyer ones.. These are as found, have potential and to go as a group together, please don't ask for singles etc. 75.00 plus the shipping! [email protected] or PM here

Some one went to town on these parts. Can't tell for sure if powdercoat or paint...dark red/maroon. For sale individually or no brainer pkg deal price! Early post war autocycle Truss fork, wow! looks complete... and all the chrome looks to be replated, has deluxe headset on board also...

Cute little 1940s-50s era Troxel saddle for the juvenile 20" bicycles..>Donald Duck and others. NICE.. A few small smudges that should clean up, haven't tried. Mild storage wear. Very nice seat in NOS shape that was never mounted or used. Could not restore one for that! 100.00 plus the ride...

Rack is in primer. Looks perfect! Not pitted, smooth as silk...just about ready for paint I'd say. Not sure what cycle mfg used this profile, but I don't see these too often.. Has the clamp on board. 150.00 plus the ride [email protected] or PM here

Lots of patina on these. Must take all. There is what appears to be a rear with the deeper side profile similar to the HD bikes, the bottom mount tab was busted off, easy enough repair, fender is in ok shape, better than some of the others. Some misc braces included may fit not sure. Must take...

Some good parts for the 1938 and up Colson bikes. 2 nice stands...one has NICE cad plating but a very small minor weld, hard to see. The other stand is excellent with patina. Guards look quite straight, one a recent repaint ni bright blue. Rack top is missing the legs. Not much going on...

Looks to have been dark red originally... Now patina brownish red. Overall decent shape with all the correct original mounting clamps on board! Very practical guard to have on hand for builds... fits a variety of good prewar models 75.00 plus the ship [email protected] or PM here

Incredibly straight prewar front fender. NO rust. The light top has the usual split/crack at the foreward screw mount. Lens is a Schwinn Scripted one so either postwar or repop. These can be modified to fit spring forks also! Switch looks good, overall very straight fender someone painted...

RED rack sold! Price drop on black one. 150.00 2 racks as found! I believe the one with the 'slots' on the side is for sure Dayton, maybe also Twin Flex? Any thoughts to confirm would help. The other also a Dayton application possibility....again...appreciate any confirmation here on these...

As stated by seller ...."The brand speaks for itself"....I'm waiting to hear the brands thoughts on this? ...."don't miss the opportunity!"......to what? report the listing? wow ... nice ...1st feedback is a gem too! I like the 2nd pic... He's so proud of the pee puddle he made, he busted...

Pan I'm looking for has TWO studs for the front and a curved plate that bolts down to that. These pans do not have chassis... Need one in restorable condition. Thx!

Here are 4 S-7 Tubular 26" inch wheels as found. The Set with aftermarket WW tires are decent and the rear with the Red Band Bendix 2 speed has nice chrome, front has some peppery rust in places. The other pair are Super Nice... some brake rub on rear rim sides but very good chrome and a...

watch my sales threads posting a ton of stuff next few days.... These fenders are NOS, never mounted and look like 26" size Shelf wear but straight. Toughest fenders to straighten out and remove dings from... Well here you go...these could go straight to the chrome shop and BAM! or paint...

Despite the repaint and aging/patina etc ... super straight tank! Never got dinged/dented by the trusts rods up front... The only minor flaw I can find are 2 very tiny holes on each 1/2, someone filled the 2 on the one side, other side will need a tiny drop of JB weld or what have. Very...

Arrived today in the mail...and Ebay win from last week! Listed with all the wrong key words..."Hornet, B6, Typhoon..." Jeez! The holiest of grail postwar Schwinn tanks... Blue Phantom tank and NOS. Sadly the inside of one half retained some water in storage or something for some time and...

This one looks decent enough! Not all bent outta shape... funky green repaint.. 2 holes for the 26 or 28" usage. Not sure exact mfg application... similar to Schwinn B10 etc others Motobikes. I also have a "W" style era correct clamp I'll include. 75.00 plus ship... will fold flat to save you...

Schwinn carrier removed from a Prewar Frankenbike parts cow. Top is postwar for sure... legs are reproductions but look good on the bike... the center U brace (see pic) was cut down the middle for some reason? maybe how that was made. Reflector is the correct prewar glass one missing the...

Nice Bulge bars 37 and up profile Torringtons.... lots of patina.. Very nice Backflip Wald 7 Schwinn and others stem...NICE chrome.... prolly clean up to 9 or so! have't tried. I think these are 28"... need to measure. At least 28 for sure.... Schwinn Grips are rough w/blow outs. No dings...

From a local deep storage last 20-25 years ...this interesting Black and Green (gold stripes almost gone) Straight bar. B serial. 35 tank and fake prewar rack aero seat and drum added by the last owner. If anyone could use the carrier (repro legs, postwar top, orig clamp and refl) I have that...

Ol' Lizard Lips now features "Vintage 24" American Lady Schwinn" with a fancy goat? ... ram? rug! See if he'd go 2600 and throw in the rug... although after reading the note about the 'etched in number bottom bracket flaw'... might be able to negotiate down to 2550.00? Worth a shot...

As found in primer Tall frame Mead tank. I believe this is one of the batch that pops up from time to time, Looks to be quality work. The 2 latches are not included / finished but does come with very nice reproduction tank hangers. Very tough item to find and well here's something to fill in...

First up! Housepainted pair of Colson fenders for the Bullnose, Grill tank, and Colson Clipper standard fork front fender. One brace missing as shown, fairly straight under the thick housepaint, the tip of one fender is rolled under just a bit, minor easy fix...Decent used set, maybe better...

Nice old survivor Schwinn Motobike B-9 model tank... overall quite presentable...decals better on one side but nice enough original overall. Door opens and closes just fine, latch is a bit crusty but does the job. There are couple of the usual truss dings on either side up front, and the tank...

Super straight in glossy white paint Prewar Tapped threaded bracket 1941 BA-607 Autocycle tank. 1st year for the design and used up through the very early post war period on B6 bikes until the inventory ran out. Overall I'd say a very decent piece...there is one verrrry small repair on a minor...

Nice survivor from a local estate. Selling as found As-Is and YES rideable! Wow! Paint looks to be very good original...decals are all hanging in there... Wood wheels have newer tires... and they are holding air currently. Nice original leather saddle is hanging in there. Uncommon finding...