Search results

https://www.facebook.com/marketplace/item/1621190391960353/?ref=search&referral_code=null&referral_story_type=post&__tn__=!%3AD

https://www.facebook.com/marketplace/item/1644547212752812/?ref=search&referral_code=null&referral_story_type=post&__tn__=!%3AD

https://www.facebook.com/marketplace/item/1071316867318148/?ref=search&referral_code=null&referral_story_type=post&__tn__=!%3AD

https://www.facebook.com/marketplace/item/1053839182491107/?ref=search&referral_code=null&referral_story_type=post&__tn__=!%3AD

Looking for ID assistance on the 2nd bike from the orange Wildcat. The sprocket appears Schwinn, the badge looks like it starts a “A” and a “T”, maybe ATLAS? These are at an estate sal about 3 hours from me and I’m debating on whether I’ll go or not. Thanks for any help.

https://www.facebook.com/marketplace/item/391469436647363/?ref=search&referral_code=null&referral_story_type=post&__tn__=!%3AD

Looking for an axle for a 36 hole, Schwinn scripted front hub, mine’s bent. Bike is a prewar DX. Thanks

Picked this bike up yesterday in Texas at antique week, looking for help pinning down the year. Wasn’t really looking for bikes, but got what I thought was a pretty great deal. I assume it’s a DX, Fleet badged, has an “F” with 5 digit serial #. I get a 52’ or ‘40 with an F serial, I assumed it...

Looking for a decent truing stand that won’t break the bank.

I have an old frame that I’d like to add modern parts to to cruise around town on, looking for a good parts source for cranks, headsets and goosenecks and things. Don’t need expensive or heavy duty bmx or klunker parts, just something to roll smoothly. Wondering where everyone gets their modern...

Old parts lot, raising money and clearing out space. Don't want to separate. 2 Diamond chains-1 Master Delta horn, put batteries, didn't honk 7 seat post Seat clamp Flashlight holder Chain pensioners 2 lone pedals with 2 extra shafts Rear Delta light, inside looks complete, may work again...

Selling as a lot. 3 ND model D hubs, 2 skip tooth, one not. One hub missing oil port cover. Also comes with 5 NOS part # D12 transfer springs, always good to have on hand. Asking 75$ shipped for all.

1936 Packard badged C model, uncirculated straight from a barn in East Texas. Raising funds for other unfinished projects. Unusual color, should clean up nicely. I gave it a once over for the pics, but new owner could make it pop even more. I didn’t attempt to remove gooseneck screw securing...

Just picked up this Schwinn from Round Top antique show. Straight from a barn in East Texas. Looking to pin down the year, Y serial #. Fenders and guard obviously added. I'm gonna clean it up and figure oit what to do with it. Appreciate any input.

https://www.facebook.com/marketplace/item/201341298182313/

1946 original paint Schwinn. Went through it a few years ago, straightened the fenders out, regreased everything and enjoyed it, now time to move it along. Liberty badge. One year only kickstand, beautiful distressed leather seat by @bobcycles. Right grip has a split, realize I forgot picture...

26” Elgin wheelset, rolls fairly true. Probably could use a going through, hadn’t been on a bike in a while. Missing little oil cap/zert. Really nice Good Year tires, cleaned up for pic. Asking 150$ shipped.

Want to move this one along, 1939 I believe, (forgot the serial # pic) Roadmaster bent tank. Got it on the Cabe about 3 years ago. Cleaned it up and rode it maybe 20 minutes and it’s been in my shop ever since. I added the grips, seat, pedals, NOS Diamond chain and beautiful Lightning Darts. My...

Do love this Manton and Smith springer. https://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_ff3=2&toolid=10001&campid=5335809022&icep_item=224151215513

https://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_ff3=2&toolid=10001&campid=5335809022&icep_item=274431010831

https://www.facebook.com/marketplace/item/273475403870360/

https://letgo.onelink.me/O2PG/e532ea46 Aren’t these fairly rare? This one’s ROUGH.

https://www.facebook.com/marketplace/item/273462620495777/

Cool curved bar frame, I was gonna Klunk it, but plans changed. Would love to see it klunked. Also have the original fork/truss rods in another ad if interested. Serial # is illegible. Asking 140$ obo shipped from Louisiana, 70525.

Parts came off my parted out curved bar Elgin. All offers entertained. Prices include shipping from Louisiana, 70525. Trying to raise a few dollars for my new mini bike addiction. Nicely patina’d complete crankset. 50$ Complete MEN'S fork/truss rods/hardware. 3 star design, was painted...

https://www.facebook.com/marketplace/item/251527659307357/

Nice shape skip toother, 56”, no frozen links, works great. Asking 45$ obo shipped from Louisiana, 70525.

Straight drop stand for 26” tire bikes. Doubt bolts are original, one bolt was cut/shortened a bit. Works fine, asking 65$ obo shipped from Louisiana, 70525.

Nicely patina’d 3 rib, don’t work-guts are there, plastic lens. Newer screws. Asking 120$ obo shipped from Louisiana, 70525. Cream top loader, guts ARE gone. Plastic lens is glued to bezel, nice placeholder or rat-rod light. Asking 40$ shipped from Louisiana.

Long tank from a crusty Elgin, tank goes past the curved seat post. Obviously repainted green at some point. Asking 140$ obo shipped from Louisiana, 70525.

Decent set of men's pedals for your rider, gone through when I got them, may need fresh grease, it’s been a while. Axels May be slightly bent, but work fine. Asking 70$ obo shipped from Louisiana, 70525.

Original seat, post included. Asking 135$ obo shipped from Louisiana, 70525.

Found these old parts at a nearby flea market yesterday, old bike stuff is scarce down here, so I couldn't leave em behind. Gonna be wall hangers obviously. Looking for any input. Thought the fenders may be identifiable, the 2 ridges at the top and the way they fasten to the braces seemed...

Which one of these does an average 2.125" tire fit?

Have 3 manuals, 1970 Sting Ray, '79 Collegiate and random '73 lightweights. Asking 20$ shipped for the lot from Louisiana, 70525. PayPal F&F please. Rather not separate and get stuck with a lightweight manual.

https://www.ebay.com/itm/Custom-Motorcycle-Helmet-Open-Face-Full-Handmade-Custom-made-Cruiser-Bike-Helmet/202786641600?_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20160727114228%26meid%3D848af271ac3e435a92c70925854a5998%26pid%3D100290%26rk%3D1%26rkt%3D4%26sd%3D202786641600%26itm%3D2...

SOLD....Nice 26” chrome wheelset, Bendix rear hub, front drum brake hub, not sure of the brand, says “made in England”. Little surface rust, but spins good. Got them in a parts lot, don’t know much about them, looking for 90$ shipped from Louisiana, 70525. PayPal preferred. SOLD...

Few things picked up recently that I don’t need. Prices include shipping from Louisiana, 70525. Prefer PayPal. SOLD. Seiss plunger horn, plunger is slightly bent, but’s works well. Very loud, I’ve been honking it around the house for a few days and everyone’s tired of hearing it. Cool patina...

Not a musclebike guy, but picked this up dirt cheap. What’s a good tip to tell the real deal from a repop. Also, looked for a minute for the serial and didn’t see it, but as I was posting the pics I noticed it on the dropout, looks like it starts with an F. Thanks for any input.

Saw this today, how rare is this? The guy was asking a good bit for it.

I’m over in Texas with the family for the Round Top antique show, hoping to find bike stuff and came across this old Shelby. Good bit wrong with it, but I was determined to find SOMETHING and Pickens are slim on bike stuff. He was asking pretty high for it, so we haggled a bit and he wouldn’t go...

Been having this for a while, never got around to messing with it so it’s gotta go. Over never even ridden it, slapped it together out the box and been in the shed since. Would make a nice rider with a little love. WILL have to be gone through to cruise, definitely could use a good servicing (so...

Trying to raise some funds, so someone buy this set of Schwinn fenders I got for a rat project that didn’t pan out. Solid fenders that could use a little TLC, cool period stickers. Repainted Delta Winner, doesn’t work and no lens and is stuck on pretty good. Looking for 90$ shipped from...

Jock strap. Swear I was looking through vintage bikes on eBay and scrolled by this, lol. A Caber? https://www.ebay.com/itm/Bike-Jockstrap-reproduction-for-serious-collector/163840914145?hash=item2625adf2e1:g:~usAAOSwefldLd1q

https://www.ebay.com/itm/URANUS-bicycle-head-tube-badge-FRANCE-antique-bikes-cycle-bike/283571941307?hash=item4206346fbb:g:czcAAOSwBaxdHzlo So immature, i know.

This is at an estate sale near me, thought it was interesting. Working, so I don't believe I could get it even id I wanted to.

https://neworleans.craigslist.org/bik/d/new-orleans-rare-vintage-art-bike/6878644616.html Pretty creative, somebody put some work into this thing.

Not bicycle related, but putting my feelers out everywhere. Looking for 10”x10” heater grates like the ones pictured below, I’ve found these already, but I need several more for our house we’re building. I know there’s a bunch of fellow hoarders on here. The rough opening on the ceiling is...

I like these tires. They don’t come up too often. https://www.ebay.com/itm/Red-White-Blue-Balloon-Bicycle-Tires-with-Stars-and-Stripes-26-Inch/283355139535?hash=item41f9484dcf:g:jn0AAOSwvfpcTePM

Just noticed this Krate on Letgo, it's about 30 minutes from me. Looking for opinions on originality. Not versed in musclebikes too much. For future reference, what's the best way to tell repop from real? Thanks.