You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Search results
#eBayPartner Most Recent BUY IT NOW Items Listed on eBay
The guy selling the unlimited supply of Porcelain Whizzer signs on ebay is a scammer.
Ebay is allowing this fraudulent activity and will not stop this guy.
Also, he has more then one account, so be careful when buying any Whizzer signs from ebay.
If you look at the attached picture you can see...
I was wondering, did all prewar DX bikes with a springer have the little bumper welded onto the lower bar (as seen in the picture), or was this only on DX bikes that had a tank and springer combo? Does anybody have an original prewar DX (non tank bike) with a springer and no bumper? Thank you!
Looking for a vintage New Departure, Bendix, or Morrow heavy duty rear or front hub. (Whizzer/ Cycle Truck style) Not looking for the deal of my life, but also not looking for something that's too expensive. Any parts/ bare hubs or leads would be great. (.105 spokes or .120) Please no late 50's...
Hi there, I am in need of a WZ Drop Kickstand Nut for New Departure hub. I have bought three sets and all have been the Morrow, and Bendix versions. I actually only need one, but if I have to buy both that is fine. After spending so much on the others, I would like to find a good used one or...
Hi there, I am looking for a chainguard bolt & screw, and a pair of rear fender bracket bolts.
They will be used on a 1940's WZ507 Schwinn Whizzer, so period correct would be great.
I think the same screws were used all the way up to the 70's or later, so anything close will do.
Some patina, and...
Here is a 1965 Schwinn Stingray project that I bought disassembled in a box.
Honestly, I am mainly into Whizzer motorbikes, but I can appreciate all bikes..
The guy that I bought it from said that it had been blue ever since he bought it in 1972.
I could see the original violet paint here and...
Hi there, I am looking for a descent locking fork cup for my Phantom-Whizzer.
Sorry, but it has to be original!
Thank you everybody, and have a great week.
I know there is a thread for restored, or functional Whizzer's, but I would like to see some project Whizzer's
Feel free to out pull those old motorbikes, and their parts, so we can see them!
Hopefully you will get motivated to finish them off!
Hi everybody! This thread is not intended to be gloomy, or send anybody into a panic, but instead I hope to educate you about asbestos and it's dangers, so you can work safely around it. Most of us know that asbestos is very harmful for you, your family, and even your fury little loved ones...
Hi there, I am looking for thirty six, 10-5/8" .120 gauge spokes for a Whizzer build.
I am trying to keep the cost low, but at the same time, I am not trying to get anything for free.
Used spokes will work fine as the back wheel has patina.
Please let me know what you have. Thank you, and have a...
Hi, I have an H-model Whizzer motor, and it is froze.
I have removed the head, and side cover, and have soaked every part of the motor with penetrating oil, but it wont budge. I am not sure where to go from here. Does anybody have any suggestions? I would really appreciate it. Thank you!
For sale is a vintage Schwinn Razor Stem. SOLD!
$50.00 Shipped!!!! I believe that this is an early prewar stem.
It is solid brass with chrome or nickel plating.
I do not think that the 5" bolt and wedge are original.
The nickel plating is...
I bought all of these parts today from a barn! There is a lot of cool stuff! I like the vintage rack, you'll know which one I am talking about! There is a little bit of everything. Some really wide schwinn fenders, a locking fork with the key, several frames, chainguards, seats, cranks (1 bent...
Hi there, I was wondering if anybody knows how to remove the part that holds the bearing circled in the picture below? I am assuming that it is pressed out from the inside?
Thank you very much!!
Hi everybody here is a cool bike that I bought a couple months ago.
It is a factory Schwinn MP97 which is the DX version of the WZ507.
I am going to detail every bit off this bike using electrolysis, wax, Rust dissolving acid, and lots of elbow grease.
The results should be stunning!
Please note...
Hi everybody! I am looking for some high quality Whizzer decals for my H-model fuel tank.
I see that there are a few on ebay, if I go that route, does anybody know which ones are the best?
Thank you!
Hi everybody!
I've had an old refinished Whizzer gas tank hanging around in my garage for a while, and I have finally decided to refinish it in the right color. I have a new old stock can of original Whizzer tank paint, but I didn't really want to use it. (it's way too cool) So I did some...
I am just curious to see who has the earliest Whizzer H-engine?
Early versions of any other model would also be cool as well.
Feel free to post some pictures, even if it is only a crankcase.
Thank you!
Here are a couple of project bikes that I found in Richmond Virginia.
They would be great for a display in somebodies shop.
https://richmond.craigslist.org/bik/6100758055.html
Here is a vintage 1943 to 1945? Model F Whizzer tank that was in need of some major help!
The neck was heavily rusted as seen below, and needed to be replaced.
This part of the gas tank is soldered on, and can easily be removed with a little heat.
I had on old gas can sitting around with a very...
Hi, I am getting ready to braze a Phantom pork-chop clamp onto a 1947 Whizzer drop out, and I have a couple questions.
1-What is the best period correct brazing rod to use?
2-What kind of steel are the vintage frames made from?
The welding shop asked what kind of steel the bike is so they can...
Here is an old Whizzer model F tank which is pretty rare, but it was covered in rust.
Personally I have a deep appreciation for original finishes good or bad.
I used a rust removing acid, and applied it with a paint brush.
You can buy a rust removing acid at most auto parts stores.
For this...
Hi there, I bought this old Whizzer model F tank, and realized that there was allot of the original grey paint left.
I am all about preserving original finishes, so I decided to remove the rust using acid.
You can use this method on just about anything! Well maybe not chrome, but I have tricks...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.