Sold 1941 Schwinn Autocycle Fender set

[Freqman1]

These came off a '41 canti Autocycle with a truss rod fork. Would require minimum modification to work with a springer. Very minor pin holes on front. Light cover could be repaired if you are going to paint but not suitable for re-chrome. Lens shot but included. Light tray is actually not that bad. Pics tell the story but happy to answer any questions. $145 shipped to the lower 48. PP as friends or add the 3%. Thanks, Shawn

 

[Freqman1]

Bump

 

[Freqman1]

Bump

 

[Freqman1]

$145 shipped

 

[Thonyv1974_]

These came off a '41 canti Autocycle with a truss rod fork. Would require minimum modification to work with a springer. Very minor pin holes on front. Light cover could be repaired if you are going to paint but not suitable for re-chrome. Lens shot but included. Light tray is actually not that bad. Pics tell the story but happy to answer any questions. $145 shipped to the lower 48. PP as friends or add the 3%. Thanks, Shawn

View attachment 474248

View attachment 474249

View attachment 474250

View attachment 474251

View attachment 474252

View attachment 474253

View attachment 474254

View attachment 474255

View attachment 474256

View attachment 474257

View attachment 474258

View attachment 474259

View attachment 474260

View attachment 474261

View attachment 474262

View attachment 474263

View attachment 474264

View attachment 474265

View attachment 474266

Fender should fit with a springer. ?

 

[Freqman1]

Fender should fit with a springer. ?

They will fit a springer but I believe you will have to drill a hole a little further back on the fender for the springer mounting tab. V/r Shawn