Prewar guard issue

[Obi-Wan Schwinnobi]

So this morning I went to install this guard and for some reason it has some serious play when screws are tightened all the way down. Any thoughts?

Sent from my SM-G920V using Tapatalk

 

[Freqman1]

Your frame is a fake!

 

[Autocycleplane]

It came from a girls bike, larger lower tube. Different part number in the parts catalog too.

 

[buickmike]

My luck runs same way.the guard in center seems to have a crown- whereas the other 2 are flat on top. That and clamp location. + Size. Does not match . CYCLETRUCK? I dunno. Do you think your bike will be done by 1st.

 

[Freqman1]

It came from a girls bike, larger lower tube. Different part number in the parts catalog too.

So you're set--just go buy a girls bike without a guard and call it a day! Yep that's me-Mr. Helpful

 

[Obi-Wan Schwinnobi]

It came from a girls bike, larger lower tube. Different part number in the parts catalog too.

So do I just find the float clamp or is it the whole damn clamp unit?

Sent from my SM-G920V using Tapatalk

 

[Autocycleplane]

Piece of inner tube cut to fit as a shim or re-rivet a boys bracket on there. If you do the tube shim right it is hardly noticeable

 

[Obi-Wan Schwinnobi]

Piece of inner tube cut to fit as a shim or re-rivet a boys bracket on there. If you do the tube shim right it is hardly noticeable

Thanks!

Sent from my SM-G920V using Tapatalk

 

[rustjunkie]

Someone should do a "spotters guide" ID thread with these little differences cataloged and measured.

 

[Obi-Wan Schwinnobi]

Piece of inner tube cut to fit as a shim or re-rivet a boys bracket on there. If you do the tube shim right it is hardly noticeable

Less rattle lol

Sent from my SM-G920V using Tapatalk