the tinker
Cruisin' on my Bluebird
In the "Instruction Sheet and Schematics " thread Rustjunkie shows the New Departure assembly tool in post #8 on 3-13 - 2015. These are hard to find and may not be cheap if the seller knows what it is and how handy it is. you can make one up yourself .......
The one in the photo is a 2 and 1/4'' length of copper pipe with an axle cone forced into one end and then soldered . you might be able to just buy a 3/4 inch copper connector if you dont have any pipe laying around. can cheaply make this tool in a few minutes. holds every thing tight together as you slide the whole deal into the hub, and just unscrew.
The one in the photo is a 2 and 1/4'' length of copper pipe with an axle cone forced into one end and then soldered . you might be able to just buy a 3/4 inch copper connector if you dont have any pipe laying around. can cheaply make this tool in a few minutes. holds every thing tight together as you slide the whole deal into the hub, and just unscrew.