Can I use just the fork legs and truss rods from a 2007 BFK with the steering tube and yoke assembly from a vintage 70s Schwinn krate
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Mixing Springer Parts
- Thread starter Arjnmrskr213
- Start date
Roger Henning
Wore out three sets of tires already!
I suspect you will have to try but suspect they are very different. Roger
PS having owned both of those bikes I do not remember them being similar. The BFK was much cheaper made that the Schwinn one. Roger
PS having owned both of those bikes I do not remember them being similar. The BFK was much cheaper made that the Schwinn one. Roger
Last edited:
WES PINCHOT
Cruisin' on my Bluebird
NEVER A GOOD IDEA!
I need a 20" Schwinn Springer. Ideally I would just use a S/D Springer but I can't afford to pay $650 and up for one. So since I know the BFK had a 20" inch springer I was hoping to use the truss rods and fork legs off a BFK along with the steering tube and spring assembly off a 72 krate springer
Similar threads
