When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Iver pedal broke off

-

1968fury

Finally riding a big boys bike
Hi all,
I was riding the Iver to do an errand and about 5 blocks to the house the right pedal broke off. My question is which way does the threads go so I don’t totally ruin the crank.
 
It’s the right side or chain side.

09EBD2FE-DB0A-4188-A400-507D2F228CE5.jpeg
 
When thinking of it, imagine the direction of the thread allowing the pedal to tighten as you ride. Or another way is that they always tighten in the forward direction. If you're asking because the bike is so old, the answer should be the same as it is on my 1912 Iver.
 
Ahh... so it’s like the lug nuts on my 68 fury.....they tighten towards the front of the car and loosen towards the rear. Duchess do you have a picture of your pedals?


Exactly, Chrysler Plymouth had reverse threads on the left side of their vehicles until 1970.
 
Back
Top