When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Trike parts

-

ratrodz

Fell off my 26X
Looking for silverking trike parts…

Front 20” wheel assembly with 2 mount holes on each side, with pedal arms.
1CEB04CA-DE00-44B1-90D9-97C57CE2461B.jpeg


Need 2 14” rear hard rubber tires with rims

4CEE6AE9-99A6-40DC-A220-4B3FFC478C0C.jpeg



Also need the small seat post
20305C6D-4088-4713-AAC1-93750139A43E.jpeg
 
That's odd. I believe they made these a couple of years but didn't think there was too much variation between years. V/r Shawn

I measured my other frame… it’s 1/2”, the other one has crud in it throwing off the measurement.
 
please have a look ....

I don’t know for sure if these are correct for silver king , in fact I haven’t IDd these

PM if they work , or need more info , no markings , appear prewar

E6786238-C4F9-4A35-AB94-2C0908D9F97B.jpeg


BC19FD35-FF7D-4C95-B210-7F1EA8895DEE.jpeg


8CF81B4B-48C6-462C-9ED7-2383302CFC46.jpeg


FAE5B19A-4CBD-430D-90C3-2F5390F33DF0.jpeg
 
When we sold NEW Messinger juvenile saddles, they were shipped with a stepped adapter seat post. The seat clamp was 1/2" and I believe the reduced post size was 7/16", seemed to be larger than 3/8"?

I have a restored small Taylor Trike. I need some air tires for it. They are single tube tires, just small versions of the style used on the early bicycles. My tires are smashed flat and harder than bricks. It's just a display piece, not a rider.

John
 
Back
Top