When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Another 1936 Schwinn…

-
Not much to report this morning other than my decision. Lately, as I am working on this ’36 La Salle, I have been asking myself, “Should I clean or not clean? So yesterday, as I was walking down our old 1930s kitchen galley, outside the window, I see the top of “Sissy” our ’54 Chevy 3100. She’s also blue, my favorite color, and in some areas, top of the cab and the tail gate specifically, not washed or even wiped down. After decades of being exposed to the elements, the tailgate shows its natural two tone look. If you wipe down, the white surrounding the Chevrolet and all the years that created this look, would rub off. So as long as I have owned her, I have never cleaned the tailgate with soap. So after seriously considering whether to clean or not clean, leave “as found”, I finally decided on the latter. I know…not a favorable decision by most, but here’s another reason why. The ’36 La Salle originally came unequipped, no tank, no rack, no light Just like “Cochina” our ’36 DBR. With our DBR, I too left the frame, fork, and fenders uncleaned and as found condition when I got her, and I love that look on her. That’s why I plan to do the same with this blue ’36. It doesn’t mean maybe in the future, I will decide to clean her up and show off more of her pretty Schwinn blue color later. For now I’ll focus on getting her mechanically sound, just like what I did with our DBR. So that’s our plan. Your thoughts.

09 Chochina.jpg

"Cochina", '36 Schwinn DcurvedBR

09a Sissy.jpg

"Sissy", '54 Chevy 3100
 
Removed the fork/steering tube and crankset, only soaked and cleaned the bearings and cones, but kept rest uncleaned . Everything looks good other than the bottom headset race, which I have already ordered and received new from @bicyclebones referred by @mr.cycleplane. Incorrect (postwar) drive side cone. Left side cone also bad, but since I usually replace the BB cones anyway, a new set ordered and received.

10 fork and crankset removed.jpg


10a crankset 4 clover.jpg

24t clover will be replaced. Definitely keeping the crank, dated '36

10b BB cup's condition.jpg


10c headset cups condtion.jpg


10d headset and BB bearings and races cleaned.jpg

Postwar drive side BB cone will be replace with correct prewar cone; otherwise, it's in good shape. Happy to see the top adjusting headset cone also in nice condition. Will reuse the original open bearing cases.

10e, new bottom headset race.jpg

Pitting marks on the left

10f, new BB cones.jpg

New BB prewar Schwinn cones from Luxlow, eBay seller
 
Last edited:
Took out some used double butted spokes and nibs, thanks @MeadRanger. Only cleaned the spokes, and slightly shook the nibs in a small glass jar of a little WD40.

11a cleaning the spokes.jpg


11c spokes cleaned.jpg


So after breaking down a couple of rear wheels, I spent a few days soaking and cleaning a total of 3 Morrow hubs. Gary Quail came down to the valley to lace up a few wheels, and we went up to visit our friend, Tyler @mr.cycleplane. Days prior, I told Tyler about these hubs. He said, “Bring them up. I’ll take a look at them. So that’s what we did. As Gary was lacing up wheels for Tyler, I was with Tyler as he took the best parts of the three. The goal was out of the three, to make two solid Morrow hubs, #1 being the best condition parts, #2, second best, and the third the rest of the parts. Tyler even went as far as replacing parts from #1 with better quality from his NorCal stash, like the bearings and lock nuts. @mr.cycleplane is always offering his services to help. Thank you Tyler.

11d 1st morrow hub soaking.jpg

First soaking

11e 1st morrow hub cleaned.jpg

1st Morrow dated '39

11f 2nd morrow hub soaking.jpg

2nd Morrow, dated '40, soaking

11g all three hubs cleaned.jpg


11h Tyler our resident Morrow specialist.jpg

Mr.cycleplane

What hoops do I use since the entire front was not salvageable and the rear wheel was all painted? Didn’t have any patina or a bit crusty set available, looked out for some at the Keizer swap in Oregon; they had a few but nothing correct drop center wheels. Asked around, and my friend Mr. Quail has a pair of matching and very patina‘d pair from an old 40s Schwinn. Super nice of Gary to offer the hoops to help me out. Wheel parts prepped and they are now ready for Gary Quail, master wheel builder, to do his thing. The Morrow hub you see in this picture will be used, but just the internals of the hub. The 2 hub shells came out so clean, too clean for this project. So a more patina‘d Morrow hub shell will be used instead, currently in route to Gary, to better match the hoops and the condition of our ’36 La Salle.

11i wheel items ready to go.jpg
 
Last edited:
More than likely, as is our ’36 Schwinn DBR, I believe these two models didn’t come with chain guards being narrow fenders and flat fender braces. The DBR didn’t come with one, but I added a prewar Schwinn hockey stick appropriate for the year. For the La Salle, very happy she came with a decent one, much better condition than the DBR’s. It was however painted this deco green color on the inset of the guard, so you know that was coming off.

12 hockey stick.jpg


12a hockey stick pain removal.jpg

First application

12b hockey stick paint removal.jpg

After an hour's time

13c paint removal on hockey stick guard.jpg

Second application

13d paint removal on hockey stick guard.jpg

Deco green color paint removed
 
Look'n good Eddie. Hey btw, if you're missing the nut from the chainguard seat stay clamp, I found it for ya, lol 😜

View attachment 1661629
John, that's funny. Good eye my friend. When I picked up the chainguard after this picture, bummed that one screw and nut was missing. I told myself, "I knew I put these on beforehand so not to loose them. Glad the screw and bolt were right there. Relieved.
 
So while I wait for the paint remover to do its thing, I wanted to address the fender guards. The typical tip and tail needed attention of course. The rear fender tail is fragile as you can see, of course by the dreaded pressure of the drop stand. Carefully and slowly went to work using just my smooth jaws Knipex pliers. In the end I think it came out okay. I plan to use a drop stand, so I’ll address the slight tear at a later time.

14 straightening out the fenders.jpg

Another tear...damn drop stands

14a straightening out the fenders.jpg


14b straightening out the fenders.jpg


14c straightening out the fenders.jpg


14d straightening out the fenders.jpg


14e straightening out the fenders.jpg


14f straightening out the fenders.jpg


14g straightening out the fenders.jpg

Forgot to take pictures, before, when I did the front fender tip. After straightening.
 
Last edited:
I found this bar recently at the Keizer swap in Oregon thanks to Mark @redline1968. Looks like these were painted many years ago, and heavy rust through the paint. Came with a deco Torrington stem. Do I leave it alone or do I try to clean it up? I decided to clean these bars up a bit. Frist, removing removing the thick surface rust . I bought this rust remover gel called Metal Rescue. I initially bought it to remove surface rust on an old 50s Craftsman tool chest that I was refurbishing. Apply, then cover with Glad or Saran wrap, and wait. This gel stuff is good for removing rust from vertical surfaces and large items like these bars. After several hours hoping the warm temperature, in the shade not under direct sun, will help with the process, rinsed in water and did a second application. it worked.

15 removing rust from bars and stem.jpg


15a removing rust from bars and stem.jpg


15b removing rust from bars and stem.jpg

This gel stuff works taking a couple of applications

Good and bad news. The good news, these steerhorns are actually Torrington bars. Super cool. Didn’t know when I bought it, hidden under the rust and paint. I just knew they were super wide. Mark and I measured, and these are super cool 30” wide. I was thinking there might be some chrome left under the silver paint. So what do I do? I decided to remove the paint. They painted the entire bars and stem; at first, looked like the stem was the aluminum version but wasn't. It took two applications and a very stiff old small brush, and the majority of the paint removed. There was a reason why they painted these bars, there were barely any chrome left; I had a feeling but went for it anyway. In hindsight, I could have left the silver paint after removing the rust; I would have been okay knowing afterwards. I don’t mind the end result either; still killer patina steer horns, more importantly straight, and even better that they are super wide. I will use these. Now need to find a right stem that will work with these bars.

15c before remvoving silver paint from bars and stem.jpg

Bars after rust removal

15d before remvoving silver paint from bars and stem.jpg

The underside

15e remvoving silver paint 1st application.jpg

First application

15ea results after 1st application of remvoving silver paint.jpg


15eb results after 1st application of remvoving silver paint.jpg

Results after first application paint removal

15ec remvoving silver paint 2nd application.jpg

applying second application of removing paint

15f all silver paint removed.jpg

final results, other than the stem and grips area, all chrome gone

15g silver paint removed.jpg
 
Last edited:
Back
Top