When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Welding repairs and fabrication

#eBayPartner    Most Recent BUY IT NOW Items Listed on eBay
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture

Dayton Vintage Speed

Look Ma, No Hands!
I'm offering my services for welding repairs and fabrication on bicycle frames and sheet metal parts. I am an experienced sheet metal fabricator and welder with 30 years of professional experience in the automotive restoration industry. I am experienced in welding steel, stainless steel, and aluminum. I offer both mig and tig welding as well as oxy-acetylene and tig brazing. I offer a full sheet metal fabrication services. I can fix, straighten, and reproduce sheet metal parts. Feel free to PM me with any questions or a quote.

20180715_210324_HDR.jpg


20180717_123512.jpg
 
Uggghhh, where were you two months ago. I took my tank to two body shops...they both declined. Had someone from my shop who was a former body man do it....it was less than expected. I ended up doing another repair and it's OK at best. BTW, Very nice work on the rack
 
So, what would a charge be for the type of repair you did you your rear rack? Super nice job by the way!!!

BART
 
Do you have any more before and after pics of your work.? I tried fixing some stuff myself and we’ll....... it’s not very pretty.
 
Yes.
This is a TOC Jenkins frame I just aquired. The tubes in the triangle are a little worse for wear. The down tube had a section of new tubing cobbled in it that was the wrong size and was crudely welded. I believe the bike frame was also used to drive rail road spikes at one time by the amount of dents that were in the top and seat tube. The rear chain and seat stays are in good order but the tubes of the main triangle are rough to say the least. The easiest fix for a straight tube frame such as this is to put sections of new tubing in. Here's a before pic of the down tube repair.
20181029_215018.jpg


I cut the old 1 inch undersized tube out and cleaned off the remnants of its remains from inside tends of the original tube.

20181115_214951.jpg


I fitted th he new tube and fixtures the bike frame so I could keep the tubes inline.

20181116_225118.jpg


I welded the tube in place then finished the welds.

20181117_164551.jpg


I'm putting a section in the top tube the using the same method.
 
Back
Top