SKPC
Cruisin' on my Bluebird
I picked up this 1936 Hawthorne frame, fork, stem and bars awhile back and hot rodded it. Very low miles with very clean/unworn bearings and cones throughout. But when riding the bike straight, the fork crown was not square to the top tube. The left fork leg was slightly(just a tad) bent backwards, offsetting the drops from the fork crown. To align them once again, the fork had to come off the bike. All good now!
I would bet no one has seen this lube before!!!
I would bet no one has seen this lube before!!!
Last edited: