Porkchop & Applesauce
I live for the CABE
Good evening Caber’s!
I finished up this 1950 EZ Speed today
I finished up this 1950 EZ Speed today
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
What bike did you work on today?
- Thread starter OldSkipTooth
- Start date
#eBayPartner Most Recent BUY IT NOW Items Listed on eBay
Kickstand3
Riding a '38 Autocycle Deluxe
.
Porkchop & Applesauce
I live for the CABE
Good morning Caber’s!
I cleaned up this 1972 Schwinn breeze yesterday. Picked it up for cheap along with another breeze and was just going to part them out but after closer inspection this one was just too nice to do that.
I cleaned up this 1972 Schwinn breeze yesterday. Picked it up for cheap along with another breeze and was just going to part them out but after closer inspection this one was just too nice to do that.
Just Jeff
Wore out three sets of tires already!
Got the first coat of primer on the forks for my prewar tall frame Schwinn straight bar. And then I remembered that I had a chrome Ranger fork from a stalled 1941 Hollywood project. So the new straight bar gets a chrome fork and the primed fork will get painted 2 tone green to match the Hollywood
Porkchop & Applesauce
I live for the CABE
Good evening Caber’s
Worked on this 1981. Started life as a spitfire 5 and now nothing left of the spitfire except the frame! Lmao
Worked on this 1981. Started life as a spitfire 5 and now nothing left of the spitfire except the frame! Lmao
Colson Bullnose. Not quite there yet!
️
WillWork4Parts
Cruisin' on my Bluebird
Did some dialing on this one today. Dropped the seat a notch to make getting on and off easier...was quite the high flyer being a 24" bike. The derailleur was doing some funky things, found loose pivot arm bolts and a frayed cable binding in the housing. Tightened the bolts and replaced the specialty 333 overload tube cable and it goes through the gears again. It also had the dreaded Murray crown race wobble going on. Put some two part epoxy under that and trimmed the excess. No more wobble! Adjusted the brake pads to grab better too.
Didn't expect to do all that today. Sure enough, by the time I got done dialing it in and testing all the gears in the parking lot across from me, here comes the funky clouds!! Decided to put it away and drive to dinner instead.
Didn't expect to do all that today. Sure enough, by the time I got done dialing it in and testing all the gears in the parking lot across from me, here comes the funky clouds!! Decided to put it away and drive to dinner instead.
