How do I remove this crank?

[TheFizzer]

How do I remove this crank from this little kids bike?

 

[bairdco]

Hacksaw?

Just kidding.

Should be able to use a punch, bolt, or something of the same size as the pin.

Tap the pin flush with the crank, then punch it out, making sure whatever your using as a punch is bigger than the hole in the pin, so it doesn't expand.

 

[catfish]

I think you need to pop the end cap off. Then the rest of the pedal should slide off.

 

[Barto]

Push/tap out roll pin using a roll pin punch....they come in the proper size and have a ball end that fits the center of the roll pin preventing deformation (worth buying a set). Tap the pedal crank out with a soft faced hammer. Use the approperatly sized wrench to remove nut. Use a set of channel locks with a scrap piece (1/5" X 4") of tire tube. Wrap the tube around the knerled nut and losen using the channel locks