Original paint, looks like previous owner removed house paint from it. Everything except stem is Iver and none of these parts are original to this frame (Maybe one or two little pieces?)
$350 shipped for all
$225 for frame only.
I bought a bike about 10 years ago that was an amateur restoration and I’m finally getting around to fixing it. The previous “restoration expert” decided to paint the beautiful leather saddle!!! I don’t want to hurt the leather underneath so I’m slowly chipping it away with the corner of a razor...
Went to pick up an all original 93 GT Mach One that was supposed to be rideable. After finding it was a 96...hours of cleaning, greasing, new freewheel and other parts it is now RIDEABLE!! Still needs a few parts. Started dusting off my old BMX gear and I think I might race it this weekend at...
There’s been a lot of requests for this lately. I can also make printouts to mail out.
I’ve used this a few times on fenders. You may need to trim more than shown on the template especially where the fender meets the seat stay. I trace this out on printer paper then cut it out and tape it to the...
My parents bought me this bike in 1987-89ish at a garage sale. It was in mint original condition and it was my first non-department store bike (besides antique bikes). I rode the sh*% out of it and eventually changed the grips, seat, tires, and lost the front brake. I just unboxed it and stRting...
24” DX Excelsior badged Balloon tire bike. All original except seat, bars, and grips (tires too??) would clean up nicely. I fixed a few fender dents years ago and made it rideable. Front tire has a split, I glued it and rode it 5 miles. I don’t want to sell it (bought it for my daughter) but my...
Not old but I know some of you are MTBers too.
KS LEV Integra internal routes dropper post. 31.6 New never used taken off new bike. $130 SOLD!!!
X-Fusion external routed 31.6 dropper. New never used taken off new bike $120
Both are cable actuated.
I also have a used rock shox that needs a...
Yale (NOS was glued to felt. Paint chipping) $40
American Flyer (NOS large Schwinn size aluminum) $30
Tribune Westfield (NOS minor shelf wear) $35
Mead Ranger NOS flat $75
Mead Premier NOS $75
Wards Hawthorn blue $35
Wards Hawthorn black $35
Schwinn Royal $45
prices shipped US
Frame, 50’s wasp with kickstand ripped off and non factory belt notches. Badge not included. $90 shipped
Fork, 24” whizzer. Missing 3 nuts and steerer has a small split. $240 shipped
Wheels, 24” S-2’s with Schwinn front hub and perry rear. Slightly wobbly. Tires are newer 24x3. Needs bigger...
Here’s a fun little project, or leave it and ride it! 78 or 79 can’t remember Schwinn mini stingray with a 20” fork and a 12” front wheel. Tall sissy bar and post so I can ride it 5’8”
(Copper bike is for size reference only!)
I'm wondering what the correct parts are for my cycletruck.
I believe it's a 1950 by the serial number.
What are the correct crank/sprocket,
Rims/hubs(especially the front) fender style and seat.
I have parts left over from past cycletruck builds but they were all later or earlier than...
Men's silverking project. I started cleaning it up then I got bored. Some scratches and a small dent on bottom of middle tube. Freddy's name engraved onto it. Lots of character. Wald fenders. NOS wald stem. OG aluminum men's bars and truss rods. OG hubs laced to OG rims with stainless spokes...
61 schwinn Speedster with dealer option springer fork. Really clean. All original except the wald handle bars, Stingray slimline grips, and I just added the red S seat. Needs a rear fender. I wiped it down with soapy water, the radiant red would polish up real nice. Needs a rear fender. $225...
I'm in need of some grips for my 67 coppertone deluxe. Would coppertone be correct? If so I'm assuming I need the chubby style because they seem to be more expensive!
Here's the 2 styles I keep finding, which ones are right?
Missing bearings and cones. Not sure if everything works properly but it all moves and seems to be doing something. $140 shipped or trade for really nice ND model A, other cool hubs, or Iver Johnson parts.
84 Bianchi, my research tells me this is the first year for Bianchi mountain bikes. As far as I can tell it's all original with the exception of the grips, seat, tires, cables, brake pads. Rides great!
SOLD!!!Will also trade for Iver Johnsons, 60's stingrays.
I need a radiant red rear fender for my 61 Speedster (it's a 26" middleweight, not usually my style but I look good on it) The bike is in great shape and I'd like the fender to match. Zero rust. I could also use a nice red S seat.
I need a few s-2's
1 20" 36h in great chrome
1-2 26" great chrome with shallow double stamped tracks.
2-3 26" painted needing paint but no rust.
These are for cycle truck and whizzer projects. I can drill bigger holes if needed.
SOLD!! Thank you!38 or 39 (I'll check the date again in a few hrs)I have the bars and stem, I just have to dig them out. The only major issue (besides no paint) is the holes for a rack in the seat stays, I was going to weld them and make it look nice but it's been over 100° here and it sucks to...
SOLD!All original (as far as I can tell), good shape. Some chrome loss. Wheels were painted yellow, I cleaned the rear and never finished the front. Was my wife's rider, but she prefers a men's bike. $200 plus bike flights shipping. Sorry bout the photos, Cabe sucks for uploading!! SOLD!!
I've had this pedal car for a few years now, I received it from my father at copake swap. Says made in England in the seat. I know it's missing the fenders. I like it as it sits, not looking to restore but I'd like to know what it is.
Rechromed drop centers laced with DT Swiss stainless straight gauge spokes, to a rechromed high flange Schwinn front hub and a New Departure Model D rear hub. Great rider set, small amount of peppering starting but it'll clean up really nice. Some chrome loss on the brake arm and dust cap. Can...