Search results

Select any 3 pair of tires for $100 shipped. 3 of the same or all different. I have multiples of each. All are new, all except the 26" are new bike shop take offs .PayPal. Messages take priority over posts. Left to right Grand Tycoon 1 Yellow/black brick tread 26 x 2.125 2 Blue brick tread 26 x...

Columbia Compax folding handle bars painted over.

Schwinn rubber ball. Sparkly inside. Measures q-7/8".

In this bunch there is a 41? Schwinn World. A New World with locking fork. A Roadmaster?, a Monark, a Shelby

Looking to see if this bike has much value. I guess the money would be in the stem

Girls 24" Shelby Donald Duck wanna be bike. Wheels are only good only as rollers. Rear reflector is gone. The housing is still there. Horn and tank are present along with truss rods and stem. For parts or restoration. PayPal or postal money order. Or cash pick up in Wolcottville indiana or at...

1982 Schwinn Lil Chik. Needs new lettering. Tires are just OK. Good for display. There is a 3/8" tear on the bottom edge of the seat that probale could glued or repaired.

Q946 World Schwinn with tapered kickstand. Missing the handle bars. As shown

I have 7 springer forks. All are 26" except #1 is 20". Some have missing bearing hardwear and some are missing truss rod brackets. Look at the photos to see what you are getting. The steerer tube lengths for each are: Shipped price #1 @ 7" $65 #2 @7-3/4" $70...

I have this spring assist 26" dropstand. It's newer but I've had it about 10 years. I think it's a little bit better contruction than the new ones they sell today for $80.

Well we've all seen the Champ reproduction headbadges. Well here is an original one on a 24" boys skiptooth frame. This is all the parts I've ever had to this bike.

Reproduction Grip Well handle bar grips. 7/8" bar. No, this not 2 left grips, there was never a left and right side grip.

What is a T&RA SS8 20" size tire. How does it differ from S-7? Specificaly a Carlisle MX 300 20" x 1-3/4".

1947 Huffman boys frame. Look at the photos to see what your getting. It has an amateur paint job as shows some pitting under the paint. To me the distance from the BB to rear fender mount looks longer than most bikes giving it that long wheel base appearance. Just my opinion.

Monark cheese grater rack , rusty.

Nice condition, smaller kids seat.

LWB Colson frame, crank and seat post. The lower rear fender mount is missing. It seams to be a common problem on these. Seat post is nice and free, not stuck. PM's over posts on thread.

Early skiptooth chainring. I'm not sure what it's from. I'm sure someone does.

4 Banana seats for one money. The pink one is Permaco, the brown one is viscount. The other 2 are unmarked. The 2 on the right are about 18" long, the white one is 17" long, the pink one is 16" long. The brown one does not have the seat post clamp. The sparkle white one does not have the sissy...

Seat with broken spring but I have replacements for it. It needs restored. Takes a 5/8" seat post.

Great Western Men's 20" frame and threaded bottom bracket cups and bearings. It has a crank rub on the right side. The seat tube has a very slight bend and part of the fender brace looks like it may be loose. Not perfect but it shouldn't be o hard to fix. It would have had a Fauber crankset.

2 guards are BF Goodrich the blue one is Schwinn. All have original paint. 26".

Hawthorne chainring 26tooth.

26 Tooth chainring and straight leg crank. For a bike without a chain guard. Has been spray painted silver so I don't know how good the finish is underneath. No bearings.

Skiptooth chainring. Should clean up nice.

Fauber Special chainring. 26 tooth. Pat. July 11, 99. Nickle is flaking is some small spots. It has a frame rub mark on the inside.

26 tooth chainring. Looks nickle plated not chrome, at least to me. It has a groove on the inside where it looks like it rubbed the frame. It shouldn't affect anything performance wise.

3 seats for one money. All need restored. On 1 the springs need bent outwards. I don't see anything broken or bent except for a seat pan edge and the bar between the springs. All take a 5/8" seat post.

I have a bunch of new Vee Rubber Co 700 x 42C City Cruz tires. 1 Pair $47 shipped. 2 Pair $90 shipped. 3 Pair $125 shipped. These normally sell for around $30 a tire online.

Looks like blue paint with white stripes. Chrome is rusty. Has A.S. bolts.

3 sets of clay colored grips. All for one money.

Nice seat with side tabs. Looks NOS, not mint. There are no cuts or cracks in the seat, just the light scratch as shown.

Ladies Troxel seat with side tabs. Decent usable codition.

Withdrawn

Top left to right Repro pre war style grips $25 Sold 3/4 I.D. Ball end $25 Sold 5/8"I.D. Band grips$25 1/2" I.D. Ballend grips$25 Sold Botton row L to R Clay color Jewel coke bottle grips no jewels included $35 Girls clay color pointed Elgin $25 Clay colored finger grips $25 Blue sparkle...

Long spring saddle as shown, rusty. Overall length front to back is 12-1/4". Springs measure 5-1/2" long.

Lucky seven seat post and shim. Shame measures 13/16 O.D. seat post measures 6" on the long side from the end to the center of the bend.

Rusty cross brace handle bars with bell and stem. Can't test the bell the trigger is up against the brand I can't loosen the screws. Lots of hand grip residue. Stem is bent a little. 21-1/2 wide center to center.

I have this girls bike it's a 3 speed with 3 piece crank, bolt on fender braces. Seat and sissy bar might not be correct. It gas Wards Riverside red line tires with the rear being slick. I'm trying to figure out what it is to find chain guard.

Crusty, fair end caps. Shafts don't currently turn, I didn't try a wrench on them.

I was told this was a 1890's men's 28" fork. It is chrome or nickle plated that has been painted silver. It has 2 screw holes for mounting a fender. Can anyone I.D. it.

7 tooth New Departure cog

AS Seat post bolts, zinc plated as shown. Only on 1 is the AS readable.

21 Headbadges as shown.

Lucky 7 seat post 5/8 x13/16. Posts are 4" and 7" long

Firestone headbadge with screws.

1 @ 20", 1 @ 24", 3@ 26" Single tube tires Lot. I would really like to sell these 5 tires as one lot because of the shipping cost. 20" Fisk Victor looks nice but has a chunk missing. 24" Gillette Ambassador. 26" Giant Chain Tread no valve stem. 26" Good Year All Weather. 26" Gillette Ambassador...

I have this 9 hole rack for sale. It fits a 20" bike. From axle hole to top rivet the legs measure 12".

A nice pair of finger grips, 4-7/8" long $50 shipped.

I have 3 different sets of ball end grips. Left to right the first one is 3" long with a 1/2" hole, $35 shipped. The middle one is almost 3-1/4" long with a 3/4" hole, $45 shipped. The SOLD right one is SOLD 4" long with a 7/8" hole, $45 SOLD shipped.