Search results

A custom stretch.

Here is a minty 3 of 69 that has been hanging around the shop for YEARS. I'm thinking about snatching it up cuz it is Sooo clean. The blue speedsteer was just given to me last week. They are both the smaller version, but then so am I. I have the correct bars for the blue one. Just...

It us a sunlite revolutions 26×2.5

I B waaay too short! ;)

wow!

Raked Waaaaay out there. Rear wheel is 65mm wide 26 inch hoop laced up to a S/A 3 speed. Front is a 27.5. Both rims are powder coated origin8 hoops.

yes

I have a customer who is restoring a early 50's wf super like he owned as a kid. So far what I know he needs is, the turn signal switch, a NICE set of hoops or a similar wheel set, and maybe a chain guard. Whatcha got? Thanks Dave

And for another 5k He might straighten the fork. or not....

PM sent

I has some as well if his don't do it for you.

gimesum

Finished the tank and got my "new" wheels built then went and got me a samich.

Yea, but it is on a one piece crank and I haven't seen any like that on anything other than on cotter type cranks.

BTW, the tires and tubes were still on them when I got them. I doubt the seller even knew how nice they were over all. :)

That's the plan!

So I bought this set of wheels on ebay figuring I would lace them into some "aircooled" hubs I have and put them on my 36 Elgin. Today the wheels showed up and, I have NEVER seen old steel wheels, or even newer steel wheels with NO rust what ever on the inside. Plus when you take into...

I can see how that would be great for bending fork legs or drop outs, but I can't see how that could temporarily spread them for insertion, since you couldn't install a wheel with this mounted on the frame. Well, I guess if it was already through the spokes of the wheel before you put this on...

of any of thier bikes? I'm looking to make some reproduction decals, both majestic and excelisor. I just need to know how long they were. TIA

a member here?

If you decide to breakup the 2 speed lot, I would be interested in one of the pullys for a triple speed setup I'm working on.

about 1 1/2 inches long with a I D of 1 1/2 inches. I need this for another battery tube I'm making. Not threaded, it needs to just slide on. TIA

Here is a trick I learned after doing this for several years. I put down one layer of foam, about 1/2 thick then sculpt it using a electric carving knife. Then I use another layer of foam about 1/4 inch over that. Then headliner foam with stretchy cloth over that, then the leather. They turn...

So I have been toying with the idea of building a black panther bike. Nothing to do with the film, it just seems like something Schwinn should have done. What I'm thinking is a black and black candy paint job. Black where the "normal" bike would be black and candy over what would normally be...

Installed I kinda messed up a little on the right side there. My fault, not the decal's.

I have a thread on here for a drop stand from a 36 schwinn for sale. Less the clip.

I center mine just using a wheel I know is dished correctly.

For your tank. I had been looking for some of these for quite some time, but all I could find were vinyl, which IMO just don't cut it. So I made my own. $10. a pair plus shipping. If for any reason there is a problem with one of them, I will send a replacement for free. I can coat them either...

called a goofy bike (I can't imagine why)

I wanted, planned to go but didn't get paid in time. Plus my old dog has incontinence problems and he would have had to come up with me. Hopefully next year!

looks like a Schwinn stand to me.

Love it!

I might be interested in the fork on the red corvette.

"A" is a spoke threading tool. It rolls the threads on. I will look at the other stuff. "D" is a chain breaker. "J" is a crank extractor. "B" is a generic tool. Used for many things. You wrap the chain around whatever, a pipe for instance, then adjust the end of the vise grip until it clamps...

And just the jewels on the rack are quite sought after.

We had one on display at our Collins store before we closed it. I'm not sure where it is now, probably in storage at our Eugene Hutch's store. I can ask the owners if they would be up for selling it if you are serious.

He had the pan powder coated. I have some brass eyelets for the bolts to go in still.

Cuz it ain't a correct auto!

Wow! Some really good stuff there, and prices on some very cool stuff is still very low. If it stays that way. On a side note. I had a Deluxe Woodie once... but it's been years. :(

If it were only a squareback...

How prefict, A wooden De Havilland mosquito model. ;)

I know where there is a pre war 24 inch straight bar. I almost bought it for myself, then I realized it was a 24 inch. I'm 80% sure it's a straight bar, though it could be a dx. Let me know if this interests you, and if it does, I can get a price and pics. I also have this little guy, I think...

That's a pretty tough order to fill....

Pic? Size of reflectors needed...

PM sent

Great plating and as far as I know, it's original. Repainted otherwise. $50. plus shipping

There's one that you certainly wouldn't see produced these days.

Peter Griffin?

Love the B F Goodrich badge!

A swing and a miss! And his age guess is only off by, well, probably HIS age. 20 to 30 years?