Search results

Hi folks, looking for a Schwinn Coach Green Locking steering tube with key for a boys springer, I'm looking to upgrade my Green Phantom, any and all help will be appreciated. Thank you.

Looking to purchase a set of Bikap hubcaps... nothing too trashed but don't have to be NOS either. Your help will be appreciated. Thank you.

DX Tank to fit 1941 Ladies Schwinn frame.. first year non hanging. Won't fit 37-40 or 46 and newer. No major dings or dent but it does have some rust damage. Asking $85.00 shipped to lower 48

Up for grabs, one Phantom rack with tailight off 100th anniversary model. Looking for $85.00 Shipped to lower 48.

Pre war Wald Knuckle CT stem available... asking $70.00 Shipped to Lower 48

Here's the start of yet another project, and I'm thinking you might like to go down this rabbit hole with me.😆 We're building this one for my girl, as an opposite to my '37 Caddy DBR. heres what I started with.. Was lucky enough to find a tank at the SoCal Cycle Swap. Thanks to the wanted...

Hello folks, I'm in search of a Springer fork for a 1941 Ladies Schwinn.. this one I believe to be a one year only with a steering tube measuring 7 7/16"s or 7 1/2" depending on you tape measure..lol.. the head tube on my frame comes in at 6" without cups. Any and all help will be appreciated...

Selling this 1960 Ladies Sears Spaceliner.. Needs some TLC. Missing tail light lense and chain, other than that it's pretty complete. Has rust, but it still shines asking $350.00 Located in the Los Angeles area.. local pick up preffered. Thank you!

Deal fell through so its back again, mid 50s Indian Scout.. I don't know much about it really. It's a neat bike and pretty complete, just needs to be gone through and some TLC. Recently bought tires for my Pops to use, but he's a Schwinn guy and refused..lol.. reduced to $100.00. local pick...

Looking for this version of the tank for the 1941 Ladies Schwinn. Any help would be appreciated. Thank you.

Taiwanese Razor Stem in great shape.. asking $65.00 shipped to lower 48

Up for grabs a early to mid 50s Indian Scout.. I don't know much about it really. It's a neat bike and pretty complete, just needs to be gone through and some TLC. Recently bought tires for my Pops to use, but he's a Schwinn guy and refused..lol.. reduced to $100.00. local pick preffered.. I'm...

Looking to purchase a Post War Cycle truck front fender (late 40s early 50s preferably) any help will be greatly appreciated. Thank you.

Here's another build I'm proud of, and a few of you may have seen already. It's my 1939 Ladies Excelsior. It's a bit of a Resto Mod and with this you'll notice two things.. I'm not a purist and I love B6 fenders 🤪 Anyway I thought I'd share some of the build process. I hope you like what you...

Since I have a post for the 2 project trucks I'm working on, I figured I'd share the one I finished recently. I've been a fan of the Red Crown Gasoline brand and their Valve caps for some time now, so it inspired me to use as the theme for this build. Hope you like it! Here's what I started...

I recently finished a restoration on another '39 CT and since one wasn't enough I found two more. Not sure why I do this to myself, but hell, I'm up for the challenge. This is what I'm working with.

My 1937 Schwinn Doble Bar Roadster build. Building this as a sort of resto mod. I'll be using 1950s Trainlight fenders and seat, Drop centers with post war porkchop, and what ever else I find to complete what I have at the moment. I'll be posting progress as I go along.. I'm not a purist by any...

Came off a '41 Autocycle I plan on making a rider, don't really trust these things, so I'm not going to use it. I'm thinking one of yous can. It's a bit crispy, but it's all there. Asking $300.00 shipped. Thanks for looking.

In search of a Springer fork to fit a Ladies '39 Schwinn 26" frame with a 7" head tube. Any and all help will be appreciated.

Looking for a 37-39 "preferably '37" Schwinn Double Bar Roadster Frame. Any help will be appreciated. Thank you.

Looking for a nice Rider quality 20 inch US Royal Chain tread clean White Wall tire.. any leads will be appreciated.

Hi folks I'm looking for a (One) US ROYAL CHAIN TREAD 20X2.125 BLACKWALL Any help will be appreciated, Thank you.

Looking for a nice clean pair of Wald Parade bars.. any help would be appreciated. Thank you.

Here is what I think is a '50 Columbia 5 Star Superb. Needs tail light, and Correct front fender braces, other than that I think it's pretty complete. Not Pictured but on Vintage Goodyear G3 Tires. Looking for $900.00 or possible trade for '40s-'50s Schwinn B6, Panther, CT Local Pick up...

What started as me trying to sell a Ladies Colorflow I didn't want, turned into me keeping it and picking up another. What gives?! Picked up a frame and tank from a fellow Caber and swapped.. Since I plan on completely restoring them with minor mods.. everything shown is just a rough...

Happy New Year folks! I'm looking for front and rear Horizontal fender braces for my Project Colorflow..Both braces on mine are incorrect, and the rear brace is damaged..Front must be for springer model.. any help will be appreciated. Thanks for looking.

Looking for a set of port hole inserts (8ea) for a Higgins Colorflow tank.. Hoping someone might be able to help.. dont need the gems.. just the inserts. Thank you.

Looking for the Bigger Skip tooth Chainring/ Sprocket off a 50s Boys JC Higgins Colorflow maybe crank too. Any help will be appreciated. Thank you.

Anyone interested in trading a Porthole Tank for this earlier smooth tank.. I could drill it, but rather not at the moment just in case...

I finally bit the Bullet. I have been a Schwinn guy since I was a kid.. and though I'll continue to be be, I bought outside the brand for the first time. I'm not sure if this is opening pandoras box or not but we'll see. Here is what I think is a '50 Columbia 5 Star Superb. Needs a correct...

Hi there folks, I'm looking to see if anyone has a spare 26 inch Goodyear Airwheel tire they might consider parting with.. I have one and would love to complete a set for a bike. Thank you for your time.

Looking for a Schwinn Cycle truck Down tube decal or stencil of some sort.. any help would be greatly appreciated

Hello folks. I'm working on a 1939 Schwinn Cycle Truck missing its drop stand and I wonder if anyone here would have one they wouldn't mind parting with.. or point me in the direction of where to find one.. any info will be appreciated. Thank you.

Hi Folks.. I'm putting together a bike for my little girl and I'm looking for a Set of Schwinn Balloon tire fenders for a 20 inch 1950's Kids bike. Any help will be appreciated, Thank You.

Just put this one together after having it shipped to Los Angeles from the East Coast.. I also want to thank fellow Cabe'r BikesNBuses for doing such a great job wrapping it up.. anyway, here's what I did... I swapped the Lobdel seat for a Persons version.. swapped the bars for those off a B6...

Hell Gentlemen... I'm looking for a Schwinn Prewar Deluxe Chainring / sprocket for a 1941 Autocycle.. it doesn't have to be beautiful but just decent enough for a rider.. let me know.. thank you

Hi there folks.. I'm looking to trade or possibly purchase a Schwinn Excelsior Ribbon type head badge. Its going on my 52 Straight bar that looks like thats what it might had had originally. I slapped an Ace head badge because well, its all I had and the bike didnt have a badge at all when I got...

Hello everyone. I'm looking for a postwar Schwinn DX right in the $400.00 - $450.00 range.. I would preffer local sale due to shipping cost.. Im in the Los Angeles area, so if you might have one please let me know, I'd be interested in taking a look at it...Thank you :)

Hello everyone Just wanted to share my collection with all of you.. Hope you like what you see :) This is the first bike I've built, and I started with only a bare frame. I went through a couple of looks till I finally decided to make it a 50's Cruiser. Bike is a 1980 Cruiser with mostly...

Hello everyone just wanted to share a few photos I took yesterday In the city of Whittier. Took my cruiser out for a ride with my cousin early in the morning and saw a few old buildings that I thought were perfect for this...hope you like the pics!

Hello fellas just wanted to share a couple of pics of a bike I just picked up last week. the guy I picked it up from told me it was a 48, but the serial number didnt match, and the wheels and fork didnt seem correct for a 48. My first thought was it had to be a pieced together bike or an earlier...