You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Search results
#eBayPartner Most Recent BUY IT NOW Items Listed on eBay
I don't have much to go. I just bought the frame and forks. This is all I have to show. I'm pretty sure it was a tank bike it has a dent in the top bar a couple inches from the head tube where the tank strap would have been.
Kenny
factory paint was under the badge.
I believe based on the...
I'm hoping you can help me date my Shelby/Gambles Eagle. I've been searching but I haven't had any luck. The vin # is N311Q74 any information would be greatly appreciated.
Thanks, Kenny
Beautiful bike Evan. As close as the tires are, I'm assuming it has 26x2.125 tires. I'm looking for aluminum forks for my Hex Tube, I bought it as a bare frame. The hunt has began for original parts.
Kenny
Thanks guys for the great comments.
I did very little polishing, I just waxed it with some Mothers mag wheel wax. The frame came from Florida, it was very shiny when it arrived.
Kenny
This is my 48 Hex Tube I just finished building.
It has Murray Chrome forks from a 60's Spaceliner, 52 Tooth sprocket is Murray, prewar Troxel seat, aluminum handle bars, rims are mid 60's Murray drop center rims with a Bendix 2 speed kick back hub, the truss came off a 1958 Flightliner, KMS...
I picked up this 48 Hex Tube as a frame only. Maybe one day I'll have all the pieces to put it back together stock again. Until then I'll enjoy it as a Rat. I picked up a 36 girls frame last year at a bike show.
Kenny
Your probably correct on the fender clearance, I didn't even think about the springer. It just looks weird to me.
Bigger tires would help the look, it has the original 1.75 tires.
Kenny
The front wheel is centered in the fender from side to side. But when you look at the tire from the side the fender doesn't maintain the the same radius around the tire. After doing a little research I've found other Spaceliners with the springer forks with the same issue.
Kenny
Brent was the original seat a Troxel or a Parsons? I have a Parsons seat I got from JD56.
The deluxe seat on my Spaceliner was bought for my deluxe Flightliner, I put the seat on my Spaceliner so it wouldn't get damaged, since I do ride the Flightliner.
I still need to find a battery box for...
It's coming along, the rear fender and rack has been aligned, rear rim centered in fender opening.
Is there any way to align the front tire in the fender, it's way off and I don't see any way to correct it.
Thanks, Kenny
Thanks guys for the great comments. I'm planning on working on it again this weekend, get the rear tire centered in the fender, get the chain cut, and a good detailing, maybe get the tank scuffed and ready for paint.
Everything hinges on how I make out on my first sky trip tomorrow, hopefully...
Made a little progress on the Spaceliner today. I went with the rims with M.O.MFG.CO. engraved on the rims. From all the pictures I've found the Spaceliners with the 7 tank had the engraved rims. What I don't understand is the rear rim has a Komet hub instead of a Bendix red line hub, once I get...
The reason I wanted to strip the tank, is if it happens to get scratched, I don't want the turquoise color to show that's a dead give away it started out as a girls tank.
Kenny
The tanks are the same, but the chrome instrument panel is different between the boys and the girls. If you notice my picture the instrument panel had to be cut out to clear the top bars on the boys bike. It sill looks nice but I would like to find a boys panel to replace it with. My tank has a...
Thanks John for the information. I'm pretty sure the tanks were molded in white. Both the girls and the boys tanks are white where the paint has been scratched off.
Kenny
I've got a Deluxe tank forward Spaceliner, I'm getting ready to put it back together. I would like to make it as close to original as possible.
Here are some questions I've come up with.
1 Should this bike have the rims with M.O.MfG.CO. engraved in the rims, or should they be plain?
2 I have...
I wish I had a few Barbie's to help get this monster on the repair stand. The small sprocket does make a lot more enjoyable to ride, took it for a nice ride a few hrs. ago.
Kenny
I installed the air cooled Mussleman rear hub yesterday, it was my first time lacing a rim. Sheldon Brown's instructions got me through it.
Total cost to bring the Jetflow back is approx. $1K. I hope my wife doesn't read this post.:cool:
Kenny
The Jetflow is really special to me also. I don't ever foresee it going to another home, it's always welcome in my garage.
Thanks for all the great comments.
Kenny
I've been working on my Jetflow for almost a year chasing parts, and enjoying the bike. I built her as a survivor bike. Mostly all original pant, rack and chain guard have been painted. I'm using a woman's skip tooth sprocket, I have the correct sprocket but my knees like the smaller sprocket...
Hi guys, I got this frame last week. I can't find much info. about Western Flyer's. I do know it's built by Murray, and it is a Western Flyer, no luck dating it.
Thanks Kenny
Roger I found what appears to be red speaker wire. But it worked great, it's a little smaller dia. but it's just for looks when I want a light I attach my 100 lumens light then I can see something.
Kenny
Where can I buy red electrical wire to hookup the headlight on my Jetflow? I've thought about painting it red, but I think it will flake off from flexing. I haven't been able to find any locally or on the internet.
Kenny
Hello, I need some information about the original handlebars for a mens JC Higgins Colorflow or Jetflow. I'm looking for what would have been used in 1956.
1 were they made by Torrington or Wald?
2 how wide are they?
3 anyone have a set they would like to sell?
Thanks Kenny
I've got a 1956 JC Higgins Jetflow that I've been gathering parts for a restoration. I've got a few questions between the 1956 and 1957 years.
1. What are the differences between the 1956 and 1957 Jetflows.
2. The majority of the Jetflows I've seen, with what appears to be factory paint...
A few changes to the painted Spaceliner. The tank bezel is in primer, I still need to finish it. Picked up some Murray chrome forks, the truss came from a bike I bought from JD56.
Kenny
What do you see that would be different than a 48 ? Can you tell by the serial no. what bike it would have been Airflyht etc. This is my first Huffman so I'm trying to find out all I can about the Huffman bikes.
Thanks, Kenny
I just bought a Huffman frame. From the info. I've found on the Cabe it looks to be a 1948, I would like to get a second opinion on the date and any other info. I can get on the old bike. serial no. 8H301250 I would like to get a head badge for it and a tank if it came with a tank. The head tube...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.