Search results

Thanks, John. There is no number. It seems to be the right dimensions for a 26" balloon tire bike. I suspect it is aftermarket and not that old. If anyone can use it, make it $15 shipped.

Sorry, I missed this. Steer tube is 7 7/8" long.

How about $100 shipped? Or make me an offer...

Appears unused. Not sure how old it is. $25 shipped.

The chrome one is vintage aftermarket. Some rust. The black one is an old stock repop from J&B Importers. $20 each plus shipping, or make offers.

Threads are good. $50 plus shipping. PayPal, check, whatever.

Spoken for.

Unknown by me, anyway. $25 plus shipping. PM with interest.

As seen in the photo. No idea what any of these came from. Free to whoever wants to pay shipping.

I believe these came from J&B Importers years ago. Never used. Minor shelf wear. $25 plus shipping. PayPal, check, whatever. PM with interest.

These are not the super deep ones, but they are in good shape and have good original paint. $25 plus shipping. PayPal, check, whatever. PM with interest.

Bought these from the local shop but ended up not using them. One was mounted but not ridden on. Some dirt from laying around the shop. 26x2.125. How about $40 shipped. PM with interest.

$20 each plus shipping, or both for $35. PayPal, check, whatever. PM with interest.

This is in pretty good shape. Good threads and the clamp is not too stretched (it'll clamp bars without bottoming out). $100 shipped. PM with interest. PayPal, check, whatever. Thanks.

Middle is sold. Others available.

Three rusty-but-solid chan guards. $25 each plus the shipping. PayPal, check, ect. You can post "dibs" here, but also PM me if you want.

As I recall, these were on a 50s Hawthorne. Other than the surface rust (no rust through) they are in good condition. Clips are all there, no kinks. Don't know what they're worth. $75 shipped? Andy

This is complete, and works... sort of. It jams up easily internally. Though it is riveted together, I'm pretty sure it could be carefully disassembled and repaired. $20 shipped from Elkins, WV.

#2 sold.

#4 sold.

Sold.

Working condition unknown. It looks like the switch can be disassembled, so it should be repairable if there are any problems. Has two bulbs and a cool molded glass lens. Marked "STAR 9". Uses an external battery pack, so there's no internal corrosion. $50 shipped or make me an offer

This appears to be NOS. It's been kicking around my shop for many years. $50 shipped, or make an offer.

Number 2 and number 4 are both sold. Numbers 1 and 3 are in good condition with decent chrome. $25 each shipped, or make an offer... just trying to clear stuff out.

Mesinger sold, Troxel still available.

Mesinger B-1 DeLux sliding rail saddle. Good restorable condition. No serious rust. Missing crash tab is included. Cover is loose from pan, but could be glued back in place if you want it for a rider. $150 shipped. 1940s Troxel saddle (I don't know my Troxel model numbers). Amateur...

It's used and dirty, but not as rusty as it appears. I cleaned a small section, and it mostly seems to be covered with varnished oil and dirt. Should clean up with some soaking and a wire brush. 52 links. $15 shipped, or make me an offer.

Came out of a 1941 Schwinn. 1/4"-28 thread. Good condition. $7 shipped.

Elgin is used, Marathon is NOS. $25 each, shipped, or make an offer.

Appears to be NOS, unmounted, and should clean up well. $100 shipped.

Sold.

Not sure what these came off of. $25 shipped, or make an offer.

Corbin Duplex Model 8 brake arm with free patina. $22 shipped or make an offer.

Specialized dealer demonstrator cutaway threadless headset and square taper bottom bracket. NOS, just dirty from sitting around. $35 shipped for the pair, or make an offer.

Used Stewart-Warner Crown speedometer. Gauge and bracket only (no cable/drive). Good used condition. $28 shipped from Elkins, WV. Thanks.

These are new, just dirty from sitting around. How about $75 shipped from Elkins, WV? PayPal, Venmo, check, ect. Andy

Unused. How about $20 shipped? Message me to claim. Thanks, Andy

At least you have paint left to refurbish! I did a light wipe of Penetrol on mine, which worked really well. Brought what's left of the color out, without making it too glossy or "wet" looking.

Thanks to advice and parts from members here, the bike is now back on the road. I re-laced the wheels, replaced the bearings, tires and chain, rebuilt the headlight, and added correct original seat, bars, and sprocket. The primered chain guard is a placeholder for now... I may rattle-can it...

Looking for a correct D-head "AS" seat post clamp bolt/nut, with patina to match my rusty/faded 1940 Schwinn. Thanks.

Rebuilding wheels on a 1940 Schwinn, and a few spokes were too rusty to get the nipples off. Not concerned about the plating, as long as the threads are good. I could use six. 3/4" long, 14ga, two wrench flats. Thanks, Andy

Found one. Thanks.

For a 1941 Schwinn. Would like to match patina, so rough is OK. Thanks.

Most plating is gone, but its straight and not badly worn. Rust pitting does not seem extensive. $50 shipped. Thanks, Andy

Sold!

Repainted, but no kinks or serious rust. Looks like there might be red paint underneath the black. Would need some minor dents straightened out to be perfect. $40 shipped, or make an offer. Thanks.

Thanks to members here, I've got the correct chain guard and chain wheel on the way. If anyone has a patina'd Mesinger B1 saddle, give me a shout... Thanks, Andy

That is great... I had the catalog art, but not the specs. Thank you.

This bike was my dad's (he bought it used in the 70s). The crank and rear Morrow hub are both dated 1940, so I'm leaning that direction in terms of the year, but I welcome opinions as I don't know Schwinns. Serial number E82244. It's pretty original, except for the saddle, bars and chainwheel...

PM sent on chainguard.