Search results

Offering a Restored Ingo Bike for sale. This is an early wood frame model built between 1934 to 1935, 1936. It has a new wood frame, new stainless steel spokes as well as a new rear hub and alloy rims with clincher tires. Makes for a good rider with easy to replace tires. New footboard mat and...

Hi the tinker, it would make a nice horse bike, needs a little more work. Check out my video on youtune: Making Jim's ultimate horse bike. to see how it's done.

Offering a Clown, Bucking, Silly Bike with eccentric wheels. New wheels are made with a 1-1/2" offset to give a 3" eccentricity or up & down motion of the bike. Great fun especially for parades. To see one in action look on you tube for: Clown Bucking Bike 5. The difference between that one and...

To replace the hard rubber tires I used Bill Warwood. He has a post in the Services section for Stainless Steel Spokes. He also does the hard rubber tire replacement. I put a post on his site showing the tricycle I restored this past summer with the tires he did. The bullet hand grips I make...

Bill does a great job on spokes, I use him for my spoke source for Ingo Bike spokes, all different lengths. Send him your list and they come back all laid out in order. He also does hard tire replacement, an example is a tricycle I restored for my GGDaugheter (see picture) small like it and up...

To help you out with some of your questions on restoration I made a video on the subject a few weeks ago and tried to upload it to you tube but because it was 24 minutes long it only came out as 15 minute. Gave up after 4 tries. Going thru all the hoops on you tube didn't work. Until today. I...

Here is the new link for the Jim's Ultimate Horse Bike video, I re-edited it.

I created an INGO BIKE TANDEM, here are some pictures and a You Tube video. First and only Ingo Bike Tandem that I know of. A fun bike. you tube search: INGO BIKE TANDEM 2 or

Withdrawn

Great pictures, thanks for sharing!😀

Offering a new 700c clincher wheel for the Ingo Bike. This is complete with a new hub, stainless steel spokes, silver alloy rim, assembled and trued up. I make the reproduction hub for the Ingo Bike and have assembled Ingo rear wheels with clincher rims upon request. So I thought I’d make some...

You mentioned potential fun. I took my #6 eccentric wheel bike (Jim's Ultimate Horse Bike) to the VMBC meet this past June and let folks ride it. All the comments were it's a lot of fun to ride it. One lady rode it around for about 15 or 20 minutes. Said it was the most fun she had in a long...

I have another video on you tube: Clown Bike 2 Ride. My son is riding one of my clown bikes kind fo fast, but you have to stand up when going fast. No the wheels don’t get off the ground

This is a Schwinn Varsity 10 speed converted to a Clown Bucking Galloping Bike with eccentric wheels. To see one of my similar bikes in action go to youtube.com and enter: Clown bucking Bike 5. This bike has a different handle bar than the one in the video. This bike has a 1-1/2" eccentric wheel...

Nice Ingo Bike, The bearing below the gooseneck and above the fork is mounted upside down. The notch should be on the bottom side and located above the seem on the back of the gooseneck, that keeps the bearing from rotating.

Slight error in posting the second video the link is. Third try to add the second link and it still posts the wrong one. Just enter the title on you tube and it will show up : (Making Jim's ultimate horse bike)

Finished my Ultimate horse bike and uploaded it to you tube. Plus a second video on how it was made the first link to (Jim's ultimate horse bike) is: . The second video (Making Jim's ultimate horse bike) is: []. Here are a couple of pictures.

Offering a Clown, Bucking, Silly Bike with eccentric wheels. New wheels are made with a 1-1/2" offset to give a 3" eccentricity or up & down motion of the bike. Great fun especially for parades. To see one in action look on you tube for: Clown Bucking Bike 5. The difference between that one and...

Here is a link on you tube for a vintage video of Jim Hurd and Tony Gordon talking about the Schwinn History Center in 1991. I up loaded a 57 minute video and only 10 minutes came thru. the link is: or lookup: Schwinn History Center May 5, 1991. Things to keep in mind out of studio was shot...

Correction on George's email address. It is: [email protected]

The spoke guy is Bill Warwood in Edinburg Ohio, his phone number is: (330) 947- 2744. Contact him by phone, he doesn't do computers, that's where I get my long spoke for the Ingo Bike. George Monty's phone number is: (708) 542-5908 his email is: [email protected] Jim Owen

Hi, I have a reproduction rear fender for the Ingo bike available. It is like the one I have listed on ebay except the fender braces are for the steel frame model as shown in your picture. (see attached picture) Contact me for details and price at: [email protected] or phone at: (773) 631-8767

Our first attempt at the hub was on the early wood frame model with a 5" diameter hub. That only gave about a 1-5/8" offset. The final ones on the video use a 6" hub that gives a 2" offset. The Ingo uses a 2-1/2" offset. The 6" hub would not work on the wood frame model becaus of a clearance...

Made a video of the bike and posted it on you tube the link is: Chuck and Jim's ingo Coaster hub

Ingo Bike with Coaster Hubs Phillip and Prescott Huyssen were issued a patent on August 2, 1938 for a coaster hub. This was at the end of the production of the Ingo bikes and it was never produce. My friend Chuck and I developed a hub similar to the patent drawing and it is on you tube as a...

Yes they are all different lengths. Fun to lace and true up.

The proud owner and restorer of the Ingo's is Dave Wegman.

Here are the rest of the pictures,

A customer of mine restored two Ingo Bikes and did a very nice job, he sent me some before and after pictures. I'd like to share them with the CABE

Check out my Ingo Bike rear fender on eBay. my price thru the CABE is $175.00 plus shipping.

On YouTube enter: clown bucking bike 5 to see the white bike in action.

I Hope to be there with some Ingo Bike parts and a Clown Bucking bike as shown on eBay. Your chance to ride it!

Hi, I just finished this one(#6) and not had time to make a video of riding it. Took it to s swap meet last weekend and had 4 or 5 people ride it. Go to YouTube and enter: clown bucking bike 5 to see Ingo Mike's bike in action. The differences is frame size, no fenders and chrome rims.

This is a Clown/Bucking/Galloping/Silly Bike with eccentric wheels. It was a 26" frame converted to an eccentric wheel Clown/Bucking bike. The wheels use NOS 24", 28 hole rims, NOS rear coaster brake hub, like new front hub. New stainless steel spokes were used with an inch and half offset to...

Hi, I reproduce parts for the ingo Bike. I have a kickstand like the one for the Ingo pictured with the the holding clip price $45.00, It is made a little stronger than the original. I reproduced the front fender in fiberglass, comes with a new metal fender brace and mounting screws price $80.00...

I"ll be there!

I'll be there.

My email used a zero before the number one, can be confused for the letter "O" try copy and paste: [email protected]

BIKE SOLD This is a Clown/Bucking/Galloping/Silly Bike with eccentric wheels. It was a Schwinn Typhoon 24" converted to an eccentric wheel Clown/Bucking bike. Used was a longer fork, and extending the rear end to accommodate the extra wheel eccentric rotation. The original Schwinn painted...

An update on the price of the rear hub assembly now $100. Also I made a DVD - Ingo Bike Restoration Tips. a little over 2 hours in length with lots of tips from my experience of restoring some Ingo Bikes. Including Ingo Bike types and tips, front wheel replacement, rear wheel replacement...

I have restored a few Ingo Bikes and re-spoked the wheels. I use a Park truinng stand with extensions I made to handle the 28" wheel and a metal plate along the each side at the bottom of the uprights to check the side to side alignment if the wheel, works great.

This model was the middle model produced about 1936 judging by the type of kickstand it has The frame members on the bottom will have a single bend towards the front. the later model has a kickstand made out of 1/2" formed rod and the frame underneath has a double bend instead of a single bend.

Sounds good I'll be there with some Ingo Bike parts. Jim Owen

Ingo Handle bar assembly Hi Scott, I am looking for the handle bar assembly for a customer of mine. You have what he is looking for, I will forward the information to him, He has the fork and just needs the top part. do you want to separate it or is it a package deal. what is your price. I will...

Looking for an Ingo Bike handle bar assembly for the steel frame Ingo Bike.

Pictures of the Ingo parts I reproduce any questions (773) 631-8767

Ingo prices Prices: floor mat $100. front fender with fender brace $100. wood platform $60.rear hub complete assembly $150. brake shoe $35. brake handle spring $15. brake handle shoulder screw $15. brake rod $25. Collar, handle bar tube SS $25. bearing handle bar tube chrome plated $30...

I make some Ingo Bike Reproduction Parts like: floor mat, front fender, older wood platform frame, and now the rear hub.