You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Search results
#eBayPartner Most Recent BUY IT NOW Items Listed on eBay
I'll be the first to admit I don't know Schwinn stuff very well, but I have seen a lot of the grips used on Schwinn bikes. Maybe I've just never had my eyes open wide enough, but I've never seen this style before. Early chubbie grip? The top is beefier than the bottom. It's a very big grip, this...
Not sure, but these look like seat tabs. I've never seen these actual ones on a seat before though. Two different types. Anyone recognize them and what they go to?
Monarch front and rear axle nuts in nice shape with surface rust. Also including other small parts from the same bike. $25 shipped. Please pm to purchase.
28" Fisk Victor single tube tire in decent shape. There is a light flat spot, and there is checking/cracking but nothing too serious. Still holds air for a little while. Spot of white paint on the tread. These were stock on some Indian models of the 20's among other mfg's. Please pm to purchase
Sale is for the three speedo drives pictured. The 26" Huret is used, the other two are NOS King brand but do not say what size they fit. Those two are made of plastic. Is all three turn freely. Please pm to purchase.
Cool looking Delta fender light with reflectors in good working order. Has rust/paint loss. Original lens is yellowed and slightly mis-shapen. Flame stickers not original and have been on it for a long time. Includes original instructions. "Batteries not included." Please pm to purchase.
Selling my very nice, clean, early 40's ladies Elgin. Beautiful two tone blue original paint. Paint has some nicks, chips, scratches, but nothing serious. Only things not original to this bike (as far as I know), are the Memory lane repro Elgin grips, NOS battery can/lens for rear rack, and the...
Cycle truck stand in good shape. I have been informed that this fits Worksman cycle trucks. Hard to see, but very slightly bent. Very solid stand. Oversprayed silver. Please pm with any questions/concerns or to purchase
Here's a nice "prewar" Schwinn repro chain guard in primer? Gray. Looks to have never been installed, but has some small nicks/scratches on the top and the tail end bent and that paint flaked off.
Nice adjustable motobike rack to fit 26" or 28" bicycles. Still retains a lot of the original black paint. The back plate where it mounts to the seat stays not original to rack.
26" 1936 blue Schwinn non-truss rod locking fork in good shape. Looks straight. It's missing the lock but looks like it has some of the internals in it. 8 1/8" steer tube from bottom of race. Ladies? Please PM to purchase.
26" red or Mead brown Schwinn truss forks in good shape. Not sure of year. Everything looks straight. 6 3/4" steer tube. Ladies? Headset missing bearings. Please PM to purchase.
26" green Schwinn truss forks in good shape. Not sure what year. 6 3/4" steer tube from bottom of race. Ladies? Forks look straight, but one of the truss rods is slightly bent. Newer bolt on truss rod yoke. Headseat missing bearigs. Please PM to purchase
Here is a real nice repro Persons mens seat with crash rail. From the 80's I believe? It has never been on a bike, but has some scuffs, scratches from kickin around the shop. Also, there is a very small slice on the bottom let side but not very noticeable. Very comfortable seat, would be great...
DOND
Here's a pretty cool looking Delta top load fender light with reflectors in good working order. Has a great look to it with rust and paint loss. Original lens intact, but slightly mis-shapen. Flame stickers added a long time ago, this is how I recieved it. Includes original instruction...
Hard to find motorbike stem with extra long quill (9 1/2"). Nice and straight. Still has decent plating though there is rust and remnants of silver paint on it.
Nice vintage German? Union bell in great working order. Strong sound. It doesn't say made in Germany on it, but I believe the words are German but I could be wrong. The 62 on the back may be the year made? Uncleaned and should Polish up nicely. Please pm to purchase.
Men's 1934 stamped Schwinn straight leg cranks in nice shape. This is the earlier style used before Schwinn put on chain guards. Do not use if you plan on using a chain guard on your bike, this crank will probably hit it. It's rusty but has a great look to it. 7" arms from center to center...
Decent looking Delta triple tail light. There is some rust and flaking paint, but the lens is in great shape. Untested but the on/off switch moves freely. There is some rust on the inside, but doesn't look too bad. The clip mounts to the chain stay and powers the light by friction of the chain...
Here we have two flashlights with handlebar mount holders. Neither has bulbs so not sure if they work but both have clean insides. Good candidates to convert to LED also. Both holders are NOS and have been added to the flashlights. Nice solid holders, not flimsy.
The smaller one is an Eveready...
Selling two sets of Sheby shock ease forks. Both have springs and seem to work as they should. The black one looks to be original paint though the red on the sides is over painted and has a 7 1/4" steer tube. The other set has no paint whatsoever and surface rust throughout and a 6 5/8" steer...
Decent set of Roadmaster shock forks off a ladies bike. These were house painted purple but most of it has flaked off and the rest should come off easily. I think the blue paint is original? Chromed parts look good to with only minor rust/chrome loss. Steer tube measures 7 1/4" from top of...
Selling these Sturmey Archer Dynohub hubs for parts or repair. 3 speed Rear hub has 40h, front has 32h. These were pretty siezed up, but soaked in WD-40 and freed things up. Rear is in better shape than the front, no idea if it shifts. Front looks like someone banged on the face of it with...
Nice set of rider condition block pedals with end caps stamped J.C. Higgins. One end cap is pretty rusty, but both pedal axles look straight and both spin but should get new grease before use. Was $40, now $30 shipped! Please pm to purchase.
Nice rider condition pedals. End caps stamped Western Flyer. Axles look straight and spin freely but should get new grease before use. One of the axle sleeves has a split but doesn't effect spinning. Was $40, now $30 shipped! Please pm to purchase
DOND
Here we have a 26 tooth, 1/2" pitch, New Departure 2 speed sprocket. Looks to be unused but has rust. Whether you live in San Fran CA, or Fitchburg MA, this sprocket will help get you up them hills!
Very nice Bendix red band coaster brake hub, factory drilled out to accept .105 or .120mm heavy duty spokes. 36 hole. NOS but may need new grease before use. 19t sprocket included but not original to the hub.
Here are two Sturmey Archer quadrant shifters in good shape. I would date these to war time due to parts being blacked out. Both seem to function as they should.
The first shifter has it's cable w/cable guide and brake cables but the brake housing looks rough. $100 shipped SOLD!
The second...
Here we have a great looking flashlight w/holder set. I put these two together and they look meant to be. The holder is NOS and the flashlight looks to have never been used either. I put batteries in and it works! ( Batteries not included). Please pm to purchase.
I don't do much with Bendix hubs so I decided to offer up some parts that I have gathered over the years. Most are NOS, but there are a few used parts in the mix. Good amount of multi speed parts. One of the single speed sprockets has 20t the rest are 18t. Total of 4 brake disc packages. Some of...
New Departure WL wartime black out front hub. This hub is in great shape but has some scratches. It was laced to a wheel at one time but never used. Please pm to purchase
New Departure war time black out 2 speed hub with 12 tooth 1" pitch sprocket. Has 36 holes. A good looking hub, but dirty and greasy. Untested, it turns and stops but should be serviced before use. Spring still funtioning inside axle. Please pm to purchase
Nice Morrow coaster brake hub dated 1934 I believe. 36 holes. Has some rust and scratches, but overall the nickel is still pretty decent. I have not tried to clean the nickel, looks like it will clean up nicely though. Seems to function as it should but should be serviced before use. Please pm...
Nice New Departure 2 speed set up with 24 tooth, 1/2" pitch sprocket. Hub is dirty and greasy but still has nice plating. Actuator knuckle is broken and will need to be replaced. Hub is untested but moves freely and stops but should probably be serviced before use. Please pm to purchase.
Decent set of CWC crows foot truss forks but the truss rods are bent. Forks look straight as do the truss support arms. Fits 26" balloon wheel. Please pm to purchase
Here is a set of UFO shaped locking valve caps. Made of aluminum with brass inside. look to never have been used. I'm assuming these are for automobiles due to there being four of them, but they could be used on bicycles also.
Nice Loud plunger horn up for grabs. Not the usual clamp position on this horn. This one clamps to your frames top tube or the left or right side of your handlebars. It looks like an older repaint, and newer bolts on the clamp. Please PM to purchase
Bendix Aviation 2 speed hub job lot. You get all the hubs and parts pictured. Hubs and shell have 36 holes. Untested and selling as is for parts or repair. Please PM to purchase.
Here we have a bunch of 26" drop center rims with an assortment of spoke hole counts. All are in nice shape, with no dents or dings and not warped. These are still dirty, and have light surface rust, and a few spots of light plating loss. Shipping included in price. Please pm to purchase.
Pair...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.