You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Search results
#eBayPartner Most Recent BUY IT NOW Items Listed on eBay
The last three weeks have been extremely rough for me. My mother has been in the ICU. Any bit of laughter helps to ease the pain and re focus my brain.
I hope that some of you can appreciate this. While the sign isn't exactly wartime, it sure does draw out a smile or two.
Knowing that some of you have some experience with this, I was hoping to ask for some advice.
Any particular tools that you found most useful?
Lend me your patience?
Much obliged.
Having only seen but a few, i am rather curious as to what these fetch.
Say all original. Condition 5-7.
Bucket list bike for me. Figured I would start saving on the side.
Thanks
As you can see the bolt has been worn down over time. I managed to secure bolts with the same tabs on them. The issue i am having is trying to come up with a logical of removing the worn bolt. I would prefer not to jump right to 'heat and beat'.
Any advice is more than welcome. I cannot get a...
Looking for at least one pair black. Condition 6+. Also, one pair in red if they made them. Condition 6+.
One pair original coke bottles in red. Condition 5+.
Didn't like the way it sat with the stem/bar mount on any of my Elgins.
I did however like this. Of course now I need a second because looking at one on there will drive me up a wall. :D
Yay Nay?
I will just keep it simple. Photos will show you most everything. Once you finish threading cones and have the wheel mounted you can't help but notice the grinding. I am hoping to take down the burrs with a file and move on. However, having not experienced this issue before, I was hoping to...
Includes everything you see on it. T10's, original chainring, aftermarket sign, and H502 crank.
If you're interested in other pieces, I have damn near everything that goes with her.
PP FF. $450 shipped to the lower 48.
Looking at a brand made domestically. Brand is Newbaums. Need to order several bikes worth. Prefer some insight before having a bunch of rolls on order. Thanks
I have yet to measure the diameter of the actual piece. But, I cannot imagine that they strayed from the original size all that much. No clue what this pieces actual title is. Much obliged.
Decided it is time to incest in something of decent proportion in order to manage my parts better. Several projects going at once and it has slowly become a nightmare. I'm tired of using cardboard boxes. Hmph.
I ask of you to share with me the kinds of things that YOU find work best for all of...
Recently picked up a war-time cycle truck. Front is the large flange hub.
Wondering if anyone has any idea as to which bearings they used? All I had were balls falling out. lol.
Just need a make and model number if ya can.
Much obliged.
Looking for the actual piece that screws into the guts and holds the bulb.
Wouldn't be opposed to a non working either. Rather not purchase a working unit. No sense.
What is with the recent influx of people that seem to be lost coming here? I'm seeing posts dragged up from several years ago in the for sale section. Items for sale without any sort of information whatsoever. I'm just curious as to why all of the sudden we are seeing this now more than usual...
Picked this up awhile back from a fellow member. Extra set of holes were already there when I received it. Fits pre or post.
More pictures upon request. One side has been welded. Appears to be a solid weld/nice bead.
More pictures available upon request.
$120 family and friends PP. Add $5 if...
I need a minimum of two, but wouldn't mind picking up four or more. N.D. Hartford etc. Etc. Condition can vary as long as they aren't completely trashed.
Thanks
Looking for a bit of information on these two.
Thus far I've managed to find that the two were possibly prewar? Possibly replacement cranks? 501 being the mens and 502 being the womens, with only 1/2 inch difference between the two.
A thread on here had suggested the possibility that most of...
Looking for a we have it all type of place. Need to order some bearings for a CT that I'm monkeying with. Not even going to go the route of trying to find original. Time I would waste waiting around would more than likely push me into Winter.
Thanks
I've seen some photos and what not of these in use back in the day. Would love to see about grabbing a pair. Maybe even making a pair or two. I would imagine that originals would be somewhat crude and probably best for display. But, I'm intrigued. Northern Michigan and especially the U.P. have...
Would like to know the proper way to remove this, please. Bearings are shot and I need to get in there. Never thought I would be outwitted by a hub. Ha
Much obliged.
Need a drop-stand latch/clip.
Also, axle nuts if anyone has some originals.
Original headbadge. Not concerned with shape as long as it doesn't look like it's been dragged on the pavement.
Wedge for stem bolt. I machined a new bolt, so the thread is not all that important for this piece. My...
Should be approx .120. Prewar preferred as they will more than likely be coming from Cycletruck wheels. Also, would like to buy nipples.
Let me know how many you have and how much you're wanting.
Thanks
Ohio
Found a place that is here in Michigan. Would like to spend my money here at home. Also, family owned. Their work is pretty impressive. Got a few loose quotes and would like to hear from some of you. Thanks
26 wheels 125 to 150 a piece
Hubs 20 to 25 a piece
I have never dealt with this...
What exactly is it that I am to be looking for in order to distinguish the difference between having a large or small basket frame?
Going to start the search for one and I'd like to get the proper basket for my bicycle.
Thanks.
Chrome has flaked off quite a bit, but remains solid where the actual lettering is located. Hub needs to be cleaned up. Original axle included. Spins freely. 36 holes, 10 gauge spokes. Any information you could ever want on this hub is in the restorations section. It has the Schwinn manual which...
1939-1951 is really what I would like to see. But, open to seeing what all is out there.
Not interested in prints unless it is something rarely seen.
Thanks.
Just recently hit me that I actually like the original yellow on the pre-war cycle trucks. Would like to know if anyone has modern codes for this color, or better yet a small sample that I could buy in order to have it matched.
Thanks.
Ps any chance of seeing the original primary colors on...
Looking into possibly picking a few of these up. Not sure how I feel about them without being able to work with them first. Yeah, I'm a weenie.
The sign and clamps that hold it in place on my ct use simple nuts and bolts. I thought it would be a bit more aesthetically pleasing to my eyes with...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.