You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
shipping has gone up for everyone, my wheels sets were generally $40-75 to ship 6-12 months ago. My advice is sell a few things out of the garage to make your extra $40 for shipping and build some wheels! :)
I actually tried contacting VB themselves and was willing to order like 20 or 30 sets, that was enough to offer me 10% off (which was still more expensive than ModernBike.com).... :)
Sorry I never had any cheaper way to get them other than ordering from ModernBike.com. I broke even on a lot of my wheel building sales, not including all the time to actually build them, another reason I got out of selling them. Now your past wheels builds have made you money, a very good...
Lots of goodies here, hoping to sell as a lot. You save $ I save time.
Schwinn Speedo kits, S bolts without the nuts (15 or so I think), huge pile of McCauley bolts I think, some nice cable clips, some tubeless tire tools, lots of 3-speed chains and pulleys and junk, Sturmey cables. Some...
Morrow rear (date code E4) - stops well, Good enough for a daily rider. ND model W up front, with shiny double butted NOS Union spokes.
also has the OG domed axle nuts.
Tired as shown included - they only have 50 miles on them or so.
These are the matte finish style I usually sell, no pinstripe. ND S.M. Front hub is very nice shape, rear has a blemish on the brake arm but a NOS driver and NOS 11T cog will make these last forever basically.
tires and tubes not included - these are drilled for Schrader valve but I only had...
Morrow rear (date code E4) - stops well, but it’s not quite as well as the NOS brake sleeves. Good enough for a daily rider. ND model W up front, with shiny double butted NOS Union spokes.
also has the OG domed axle nuts.
Probably one of the last sets I’ll do on my own (without people...
Original style 700c faux wood rims with pinstripes and gloss clear.
Model C rear with a D outer dust cover, not great finish on the shell, some nickel has peeled off but it’s a rider and again NOS driver and NOS 9T cog, Internals are all clean and rebuilt. Front SM shell is decent no pitting...
This is my mother load of Morrow parts. Many years of collecting but I’m too busy for it for the foreseeable future. I can give lots more photos upon request. You can also see some additional photos in my withdrawn Morrow parts sales
At this time I’d like this all to go in one pile. If I don’t get a good price I’ll consider breaking it up, but most likely it will just go back in a drawer until next year when I do some cleaning 😜
3 AS Lock tumblers (working from Wes Pinchot), one AS key, one copy with each. Skip tooth connector links 3 boxes 25 each. 10 nos new departure oil caps. A pile of Nd hang tags. 4 working (all tabs are there) Bendix kickback hub clips/rings. NOS Bendix kickback brake discs. Brand new...
Here is a reference of what I have done, I did my best to offer something cool and middle of the road budget wise. As always you can spend less if you do all the work yourself, and you'll have fun and learn a lot in the process. It was a fun project for me to build a handful of these but these...
NOS New Departure hang tags, 35 count. These are very nice condition, no dry rot or water damage. Will ship in flat rate box to prevent any bending or damage.
The Atherton with the larger square arm was in one of my wheelsets but while it rolled nice it didn’t stop as well as a Model D. Missing one of the larger axle nutsWould work great for display or a slower parade bike.
Prefer to sell all as a lot but realize it’s a mix of stuff so I might break it up if it doesn’t all go.
11 speedo kits for krates?
5 gulco reflectors
The gold cylinders go inside phantom pod lights (stop and go circuit on/off)
I think the key type things are for working with locking fork...
I’d prefer to sell as a lot. Not sure what all this stuff goes to but everything you see is included. Most all of the pulleys are stamped SA and they are metal.
the bag of parts has some chain adjusters, nuts, cone wrench marked SA, etc.
I tried messaging him as well, multiple times. I gave him a fair price estimate of $500 or so on the Phantom (originally there was no price), also asked if $4k was the price for the one bike or multiple - got no response. I don't really judge anyone personally - he or his family spent years...
I have a set of ladies Iver Fenders - came off one of those hybrid 26/28” bikes, still has the reflector. Some 26” fenders with the braces. 700c 2.2” wide Retro rides I used for test rides when building wheels - they actually fit on the ladies Iver I had that the fenders came from. It was a...
All the but first three (closest to camera) are New Departure NOS. I think there are 10 20-tooth (on the right) then there are some real small 1” pitch ones and a pile of smaller diameter ND ones (on the left).
one ND 11T as well in back is included
looking to sell as a lot currently, maybe...
I have some VB hoops in now. I have a Morrow rear hub and a ND front hub - if you still need a set let me know. I can use hubs you ship me as well for $75 off.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.