Search results

Schwinn built original paint Mead. No dents or cracks. Fender mounts not blown out. This was spray bombed at one point. Re-paint was slowly and carefully removed to expose OG paint. I noticed a little red that I missed taking photos, but 99% was removed. A link to the clean-up on this bike...

Late 53' serial # early production Jaguar with double fender brackets. This is a 1 year only bike! It has been cleaned and waxed and even with the patina caused over the years, the paint still shines. Front hub, steer tube, and crank have all been cleaned and greased. Rear wheel, the outer...

A lot of time and effort must have gone into repainting this tank. High quality durable paint, no rattle can job here. The "Whizzer" and tear drop were hand painted. A couple small touch ups in the "Whizzer" can be seen if inspected, but I didn't notice them until tanking photos for this ad. I...

This has not been cleaned in any way. Very solid tank. Very good original paint holding strong. Missing the horn unit. Tank has a dent on a couple louvers and one dent on the left side as pointed out. All threads look good, unfortunately no hanging straps either. Feel free to ask any questions

Has some rust and some chrome loss. Lens is there and not cracked. Contacts look clean. Had to roll the batteries to get the light to work, but it does function. Feel free to ask any questions!

Threads are good and smooth. Looks like it has a line from being lowered too far in a fork. No hammer marks. Retains a little shine. Bottom has some pits and what looks like a repair? These are probably best as a display stem anyway.

Pics tell the story on this one

I believe these from are right around 1910. Original black paint with a couple hints of red pinstripe. 32h front and 40h rear. Front wheel has an Enfield Cycle Co hub. The hub rolls good and appears that it would clean up very well. The rim did have 2 dents that have been carefully tapped...

Schwinn built original paint Mead. No dents or cracks. Fender mounts not blown out. This was spray bombed at one point. Re-paint was slowly and carefully removed to expose OG paint. I noticed a little red that I missed taking photos, but 99% was removed. A link to the clean-up on this bike...

Right side has 2 dents on the rib and one louver is bent slightly. There is some pitting, but no pinholes. Still a very solid tank. Hardware is not original and the front mount threads might be partially stripped. This screw does not tighten down, but threads are still visible. Maybe just the...

In search of an earlier Paramount adjustable stem like the one pictured. Prewar or postwar. Doesn't need to be all that nice. Peppering and rust is OK as long as it works as it should. I think they were all 7/8", but to be sure, that is the size I'm looking for. Doesn't need bars Pictures...

Pretty open to options on this one. Only requirements are that I need them to be a pair and they must be clincher so I can run newer tires. They will be ridden, so if they are wood, they have to be up for it. Ideally something larger than 26" and in the 1 3/8ths and under range. Let me...

In very nice shape with all brackets. Not surprisingly missing the 2 bolts for the front mounts that would attach the guard to the frame. Eyelets for skirt lacing. Feel free to ask any questions

Recently picked up this bike. It's obvious that it was a typical men's frame that someone converted to a ladies step through. The brazing was done very well in this one. Just curious of it's origins. I have a direction I lean, but wanted other opinions. One fairly unique feature is that the...

Open to hearing trades too Definitely been sitting a while and will need some cables and some elbow grease. Paint has some chips and scrapes, but it's still a rich color. Almost a satin right now, but will definitely pop and shine with some wax. I quick washed this a couple months ago, but no...

Saw this bike 2 years ago at a local auction. It never came across the block like a lot of the other bicycle lots. Finally got a second chance at it. Super tall 26" frame makes me feel little. Definitely has its bumps and some repairs and missing parts, but I absolutely love it the...

Display tires. One US Royal Master Centipede Grip. Some minor irregularities when inflated. Minimal cracking. One US Chain 400 ribbed white wall. Tire has some marshmellow melting/cracking. One frayed spot on the bead. Minor cracking. Both look pretty decent mounted and aired up. Price is...

I believe these are Bendix aviation 2 speed drivers. Front 3 look like they might have been used very mildly, the others are NOS All for one money

I think this is mostly Bendix and Sturmey Archer, but there might be others as well. Lots of NOS parts and some mildly used. Whole lot for one money

Front drum inside looks really nice. Brake shoes look NOS. Hub has some lifting chrome, but most is nice and will polish up. The outer plate looks like it's been painted silver and has some pitting. Brakes expand and operate like you would expect. Other bare shell is a little nicer and will...

Prewar razor style cycle truck stem. Heavy peppering, but some chrome remains. Bolt is 11" long. Threads smoothly, however the wedge is broken at the point. AS bolt is missing, but notches look like they are okay if a replacement is found. Looks slightly bent down to the right. Feel free...

Will sell fork separately if any interest. I believe this shaft drive is from 1900, but without a badge and not being well versed, please look closely at the pictures to see if they're what you are needing. Frame is very bent in the top bar and downtube, so just a parts donor here. Serial #...

Big ask here and not expecting much luck, but worth a try. Looking for an original paint straw colored Y frame Shelby frame and fork. Fenders would be awesome too, but not necessary. Accent color is not important, just main color being straw is all I need. Picture credit to Night Cruiser...

2 NOS Schwinn labeled Kenda knobby tires. 20 x 1 3/4. The plastic protector is still hanging on over the "Schwinn" 2 NOS Kenda 20 x 1 3/4. Was told they were an alternative stingray tread? 1 NOS Kenda brick 20 x 1.75 Sold as a lot. The speckles do seem to clean off. Feel free to ask any...

I believe these were mostly found on CWC cycle trucks. Possibly other bikes too. This is uncleaned. It should brighten up some if desired. Has just a slight dish. Looks straight held vertically, but when on a flat surface the center has a slight rise or fall depending on which side is down...

Back up for sale! First year Elgin Falcon project with 28" clad wheels. L62565 serial. The frame has no cracks that I can see. It does have a dent on the right rear stay. Also, has a very shallow dent on the top bar about where the tank strap would go. Front fender has dents and has been cut...

One of these was brought up in 2011, but I was curious if anyone had any more information about what this might have originally been on. The rib and grease point seem like a good idea, but obviously the variation was short lived. Any thoughts or information would be great to hear!

7 original boxes with tubes. Boxes obviously have some condition issues, but still cool for display. $60 shipped for the lot

The fork had been stripped and is still in bare metal. Chrome is peppered on the truss rods and top plate as you can see in the pictures. The beehive spring is missing a bit of chrome. The backside still retains some. Steer tube length is 6 3/4". Threads are very nice. There is a gouge...

A color combo you don't often see. Factory gray with dark blue claws. Paint on the frame is solid and should clean up a bit more. Rear fender blue is holding up pretty well, but the front fender has some paint loss and rust as you can see in the photos. Only a couple shallow dents that should...

Missed out on one of these. If anyone has one that they are willing to part with, I'd love to take a look. Thanks in advance!

Original paint should come back a bit with some scrubbing. They were on a Hawthorne fastback, but I haven't found another with this paint scheme. One dent in the rear fender and a little extra push in on the dimple for frame clearance. 2 holes in the far back, where something was mounted...

I believe this is a 35 or 36 DP Harris built Zenith. Transitional motobike ballooner. The frame still retains some of the Rollast style stenciling. Some white is fragile. No dents, dings or repairs to the frame. Looks nice and straight Fenders are raingutter 26". Stainless I believe...

Back up for sale for the moment. Pretty clean survivor Skipper. Frame design only used 1 or 2 years. Everything moves smoothly, but I would recommend a clean and grease before putting a lot of miles on it. I don't believe this bike has ever been apart. Hasn't had a chain since I got it. A...

A lot of time and effort must have gone into repainting this tank. High quality durable paint, no rattle can job here. The "Whizzer" and tear drop were hand painted. A couple small touch ups in the "Whizzer" can be seen if inspected, but I didn't notice them until tanking photos for this ad. I...

Black mud flap looks to have been installed at some point. (Black mudflap no longer available!) White mud flaps look to be unmounted. Selling white mudflaps as a pair. Feel free to ask any questions

Start to a fun little project. Make it a pig bike, restore it, or turn it into a Donald Duck bike. Lots of options on this one. Old repaint that's aged in nicely. "JON" decals on the top bar. Seat is in pretty nice shape, small scuff tears on the right corner. Fork looks bent back a little...

Early post war boys ballooner 20 x 2.125. Year is up for debate in a previous post. Frame has no dents or cracks, just paint chips under re-spray. Fork looks like it might be bent back slightly. Feel free to ask any questions

Wheels spin nice and are pretty true. They haven't been cleaned. Hubs should clean up a little. Some rust coloration can be cleaned off the paint if desired. White walls should clean up some too. Under the tires looks nice. Have not removed the tires. Front wheel has a curb ding and a...

Uncommon 36 hole 20" wheel set. Air cooled musselman skiptooth rear and bump musselman front hub. Have not tried to clean these. There will be peppering, but I'm sure they will improve a good amount with some elbow grease. They will need to be cleaned and greased, but rotate pretty true and...

Taken off a riding bike, but would probably be best to clean and grease if you plan to put a lot of miles on it. 10 tooth cog shows very little wear. Very nice chrome would look right at home on a great survivor or a restored bike. Getting hard to find them this nice! Only thing worth...

This wheel has been disassembled so the rim could be cleaned and waxed. No dings or dents. Hub has been cleaned and regreased/oiled. Wheel is about 95% true. Definitely good to ride as is, but if you have a stand, it would be easy to get it 100% The tire still has very soft sidewalls and...

Ox blood with a brighter red in the darts. Frame/fork look dent and crack free. Paint should improve a bit, but the frame does have some paint loss. Fenders look like they will come back better. Morrow rear hub is N3 (3rd quarter of 44') New departure front $175 shipped with wheels $125...

I have wiped this bike off, but haven't cleaned up the paint in any way. Looks like it was red white and blue, but most of the red has faded to orange. Should come back with rubbing compound if desired. Rolls good, horn works, should be a quick clean-up on this one. No dents or cracks in the...

I know it's early post war, but can't pinpoint the exact year. Original dark maroon paint has faded to a milk chocolate brown. Just finished cleaning and greasing. It rides very smooth and brakes as it should. Rear cog has some shark fin wear. Didn't replace because I figured I wouldn't put...

Front AS bolt is different than most. Wedge AS bolt turns freely in the wedge. Wedge is in good shape. Haven't tried to clean this. Should clean up a bit, but definitely has some peppered chrome and some chrome loss on the left side. Stem looks straight. Feel free to ask any questions

I believe this shaft drive is from 1900, but without a badge and not being well versed, please look closely at the pictures to see if they're what you are needing. Frame is very bent in the top bar and downtube, so just a parts donor here. Serial # 12649. Only one small dents in the important...

I believe off a 1952. Balloon 20 x 2.125 all original plated center stamp S-2 wheelset in great condition. Patina is perfect for a survivor. I wiped the loose dust off and that's all for cleaning. Will definitely clean up more if desired. Spin pretty true as they are. Front wheel has Schwinn...

An assortment of hubs and parts

In order as shown in pictures. Left to right. All 3 speed hubs except the first. Most are missing parts as you can see and will need cleaning before use. I haven't inspected any of these hubs. 51' 4 speed 53' 55' 62' 63' 69' 72' 74' 86' 86' Shells 52' 62' 67' (28 spoke) 69' 79' 81' 81' 88'...