Search results

If anyone is familiar with the 50's Rollfast/Hawthorne springer, please look me up. I'm looking for this exact springer assembly (as shown), this type of fork has the squared, opened dropouts for wheel mounting; must include complete original rocker assembly, dual spring assembly with domed cap...

Greetings CABE community. 🤬😭 I want to share a very painful experience that occurred over a week ago and I'm still livid by the thought of it. This thread is particularly to the sellers. The attached photo on the left shows a complete Hawthorne springer assembly with a Delta sealed beam...

Letting go this prewar - wartime Shelby Shock-Eaze, men's springer with both a modified (installed) and its original spring mounted assembly. Cleaned up, all hardware hand tighten. Ready for paint or leave as is.

I call it the Frankenstein of springer forks, but the coolest. Original linkage for front wheel mounting is all there. Includes the Delta Sealed beam headlamp. all you see, you get. Thanks for looking.

Prewar Hawthorne Comet frameset

These are Dallas type handlebar. Now, these bars don't have the Torrington script where drilled in hole is, but it does have two 'T's etched in. The clamping area is not Bulged & knurled, but has a welded rise for clamping. These bars measure 27.5" wide. I believe these are earlier Torrington...

LETTING GO A PREWAR WOMEN'S CWC SHOCKMASTER SPRINGER FORK, CLEANED UP ASSEMBLY, HAND TIGHTENED HARDWARE, NICE PATINA, READY FOR PAINT OR LEAVE AS IS. THANKS FOR LOOKING.

HERE'S A 50'S SHELBY SPRINGER YOKE ASSEMBLY REPLACEMENT, NICE PATINA, STRAIGHT AND SOLID. THANKS FOR LOOKING. 950

HERE'S A COOL ITEM, PERFECT FOR A RAT PROJECT DUE TO IT'S CORRODED COSEMETICS AND AGE. IF YOU HAVE NO SHAME FOR AGE, PATINA AND CHARACTER, HERE'S YOUR PIECE OF HISTORY. NEEDS HARDWARE TO KEEP IT TOGETHER. THANKS FOR LOOKING.

LETTING GO, MEN'S TROXEL SEAT FRAME ASSEMBLY. ALL CLEANED TWO PIECE SADDLE TOP, SOLID FRAME AND SPRINGS, HANDTIGHTENED HARDWARE. READY FOR RECOVER, PAINT OR LEAVE AS IS.

LETTING GO A POSTWAR MEN'S SHELBY SPRINGER FORK, CLEANED, STRAIGHT, RIDER CONDITON, NICE PATINA. HARDWARE WAS HAND TIGHTENED. REPAINT OR LEAVE AS IS. ONE NOTE HOWEVER, THE PIVOT BOLT LENGTH NEEDS TO BE SHORTENED OR ADD SPACERS (SEE PIC).

Here's a cleaned-up, nice rider condition Huffman Springer. Ready for repaint or leave as is. Thanks for looking!

Letting go of a hard find. A 1941 fully equipped rear Luggage Carrier for top-end Roadmasters. Little remnants of green paint, lots of surface and penetrated rust consumed this rack. Most of the rust was removed along with the paint. Battery compartment is just a shell now, It was a bit rough...

Postwar Western Flyer Crankset. All Threads are good.

Prewar Hawthorne Crankset Showing its age with style. All Threads are good.

Prewar Hawthorne Crank. All threads good.

Late 40's - Early 50's. Troxel Bottom Half Seat pan for crash rail model. Steel pan in survivor condition, no rust or surface corrosion.

Postwar Troxel deluxe model with crash rail. Straight solid frame assembly, decent springs, extra set of rear springs included. Mounting bolt threads are good. Ready for paint or as is.

Prewar Messinger, Wire Frame straight & solid. Matching top is position on frame for presentation only is in need of work. When first purchase, saddle assembly was rusty, with the bottom of the top being worst. Bolts & nuts where badly seized and had to be removed (with care). Mounting bolt...

Survivor women's saddle Top only, original covering & stitching, with mounting nuts, good threads.

Greetings all, I'm looking for a set of must have postwar Shelby Truss Rods & Bracket assembly with associated Nuts, Bolts. I attached these pictures from an earlier cabe posting. Must be off a men's bike. Please contact me, r eady to make a deal. Many Thanks!

Here is a McCauley Rack with taillight. This rack might be a wartime period model; braces are curved not flat, faded chrome, Rack is straight. Looking to trade for a early McCauley un-lit version with the flat braces as shown below. Rack must be straight. Otherwise, asking $100. shipped. Thanks...

This is a Schwinn locking fork, perhaps a 1937. No damage of any kind, locking mechanism in good order, Threads are very good. As is. Asking $125.00 Shipped. Thanks for looking.

Letting go; here is a Morrow rear break hub together with a Schwinn scripted front hub. Rear hub is stamped F3 indicating the year. Base on threads on the subject this hub is dated 1936, but please do your research. Hubs were taken apart for cleaning, sprayed with anti corrosion protectant film...

Greetings Cabers. I'm letting go the 36 Schwinn, ACE badged B98 Tall Frameset, Frameset was originally purchased from a fellow caber last October as a frame & fork set. The fork however was a locking fork with the mechanism angled; unlike the correct 1936 locking fork. Terrific deal nonetheless...

Hello Cabers and salute to the artisans at CABE. Here is my contribution to this page. I did this Spaceliner ooooohh I guess 6 years ago and posted on RatRod Bikes website. I since parted the bike, part and all. so sorry I did that. The Stem is a very rare part. Hope you folks like it. I'll...

Hello and Happy Holidays! This call is to the Shelby Community. I need help! Recently I purchased a wartime Shelby Shockease Springer. Fork assembly of course was grease dirty, so I began the tear down. I have a problem disassembling the bolt which travels thru the spring. I can turn the outside...

I'm may regret this; you are looking at a 1936 Shelby Eagle frame set; made for Gamble. All you see in the photos are included; Drop stand 19 hole Chainguard Crankset 30" Troxel Longhorn handlebar Seatpost Frame features integrated ears for Drop Stand, unique to this type of frame. Despite...