Search results

Send a photo of what you have when you have a moment

Its a pin fixture. Nice simple design. GLWS

The fasteners (no wedges) are in! I'll be sending them out tomorrow through next week. Thank you for your patients!

First batch is done! I'll be sending these out to the first few customers on my list. I'll be filling the rest of the orders in the coming weeks.

I am recieving the first batch of necks this week. I'll post photos and contact everyone who has already paid soon. Thanks!

I need a basic 4bbl intake. But thanks for sharing.

I'm looking at all offers. I am doing a budget build on a 289

I need a 4bbl intake manifold for a 289 Ford. Thanks!

If anyone is in NY

All Gone as of this morning. Thank you all!

All sold! Thank you very much!

4 customers down and 6 to go! 7 customers down and 3 to go! 3;10pm pst 10/9/23 9 Customers down and 1 to go! 9:56am pst 10/10/23 The list will close proptly when the last customer orders. Thank you everyone!

4 customers down and 6 to go! 7 customers down and 3 to go! 3;10pm pst 10/9/23 9 Customers down and 1 to go! 9:56am pst 10/10/23 The list will close proptly when the last customer orders. Thank you everyone!

4 customers down and 6 to go! 7 customers down and 3 to go 3;10pm pst

Original post can be found here

Hello everyone. I’ve finally created a revised price list for the CABE. However, as a special thank you I will be providing an additional discount for the first 10 necks customers that I sell to on the Cabe. I really wanted to say thank you and show my appreciation for your patronage and this...

Thank you Jim. I am glad I'm finally here and able to make this happen.

Hello everyone. I’ve finally created a revised price list for the CABE. However, as a special thank you I will be providing an additional discount for the first 10 necks customers that I sell to on the Cabe. I really wanted to say thank you and show my appreciation for your patronage and this...

Thanks Catfish. You and one other really helped the project along with your patronage. I will not forget what you have done.

@C M Gerlach It looks as though these gears also fit Crescent bicycles. I just got confirmations from an overseas customer. Great!

Hello I wanted to give everybody an update on the #4 Tomahawk necks. I have completed about 10 necks and have about 10 necks on the way. Given my current manufacturing capabilities I should be able to produce a small amount of necks every month for the foreseeable future. During this project I...

Looking for information on the below Wald Tomahawk. Any information such as photographs or original examples would be greatly appreciated.

Yes, I'm making about 10 sets tomorrow. Let me know

Thanks for the mention. Your fasteners are on the way, and I will be busy with orders through the weekend. I am working on TOC gears for a few bikes then back to my Tomahawks.

Send me a message so I can forward my payment info. Thanks!

Progress so far. I'll follow up with a post explaining where I'm at with the process, hurtles and a signup sheet. I may have some blems available as well.

You really know how to age stuff. Thanks for the photo! #4's coming soon

I'll be posting photos of a polished and plated #4 soon. Thanks for the photo @TRM !

You're right. I didn't notice the holes.

check the spacing and hole diameter when you get a chance. As I stated earlier they went on Miami Flying Merkel and Speedwell, and others. @hoofhearted, the 3rd photo is my Emblem

Looks like a Miami or Emblem style chain ring. Very nice https://thecabe.com/forum/threads/speedwell.158448/page-4#post-1249895

Progress

Thank you for the mention. Very cool project that I thoroughly enjoyed!

35

Does anyone have or has anyone seen one of these Tomahawk stems in person?

I was busy in the shop this morning and finished up the prototype. It is not polished yet, but this will clean up very nicely. The reproduction is exceptional and should be an excellent addition to any prewar bicycle needing that special something. Pricing to follow soon.

Thanks allot Chris! It was a great project. I hope your back on the road soon.

Really nice! Thanks for sharing!

Busy in the shop with the wald #4's

I miss Mark at Olympic, haven't been there for years

I'm in the process of making a batch of drop stand bolts. If you are interested in a set message me here or send me a dm. 2 bolts with 2 nuts plain finish $25.00 plus shipping. Thanks

Semi finished, waiting for final fitment and adjustment

Orders are being filled! If you need a set please contact me while I have my setup running, otherwise it might be a week or two before I can make more sets. Thanks again!

I'll also be making these in fillister head and round head. Please specify what you want. No specification means round head

I'll be filling all the orders this weekend and should be mailing out Monday. Thanks all, I got a cold and am behind on everything.

First set is complete! It's going to @aasmitty757. I'm also dropping the price to $20 + 3.75 shipping because there is less work than I anticipated. This may change in the future due to material cost skyrocketing. Thanks all for the help! @saladshooter @Freqman1 @cyclingday

What is this off of?

As found on Facebook marketplace: "Class Cycle bicycle shop closing. Everything must go. 1531 S Novato Blvd B, Novato, CA 94947 Prices vary. Some things are free. Question? Please call classCycle bicycle shop [hidden information] Please tell them Jesse sent you from Waste not want not...

I'm making some this week. I'll post photos!