Search results

"Like New" 1987 Trek 1000 Road Bike, Made in the U.S.A, Bonded TX 56CM Aluminum frame, Suntour Cyclone 7000 components include Suntour indexed "Accushift",12 speed, sealed bearings throughout, 3 piece alloy Sakae SX crank set, Dia Compe Apha II black forged brake set with Aero brake levers...

Can anyone Identify the model of Trek, and year of this bike please. It has Suntour 7000 derailleurs, Dia compe CX-II brake calipers, Aluminum frame, Silver in color, made in USA. Matrix Titan II rims, Sakae SX crank set, Serial number from bottom bracket is 282265 Thank you

On one of my recently acquired 3 speeds. The Sturmey Archer trigger shifter, says 3 or 4 speed. Did Sturmey Archer make a single cable internal gear 4 speed hub? I recently just learned about the dual cable 4 speed but never heard of a single cable 4 speed. What models would have had the single...

I know this is a poor picture, but does the front fork appear to be bent backwards on this bike?

Hello, does anyone know anything about this now defunct Dutch Brand Viva, and their Velo model? Thank you

Can anyone tell me about a vintage bike brand "Sabre"? The bike is a Sturmey archer 3 spd coaster brake. I am thinking European, as if it is Asian , I would think it would be Shimano equipped.Thank you

Hello, this summer I bought and sold a few Bendix kickback 2 speeds and I am intrigued with their operation. I understand that the F&S Torpedo Duomatic and Automatic are built even better than the Bendix. What brand/model bikes were equipped with the F&S Torpedo Duomatic and Automatic hubs? I...

I am trying to date a Raleigh Sports with no date on the rear Sturmey Archer AW hub and it was made in Malaysia but has all the Nottingham England markings on it. There is a number stamped on the top post lug where it meets the seat tube. That number is 3618513 . There is an indentation after...

Hello, I picked up a Raleigh Sports with a bent chain ring/crank sprocket. I removed the crank arm and sprocket and did my best using a hammer and anvil. I then put it back on the bike and tried to fine tune it with a pair of slip joint pliers and a hammer. I just can t seem to get it right, to...

Rare, 1946 Schwinn Continental , all original, 3 speed, top tube shifter, caliper brakes, working original period correct generator set, working period correct spring rear carrier, great looking chain ring. This bike is in fantastic shape, the paint is blue tone with gold colored pin striping...

Is this a quick release skewer on this front axle? The handle is made of plastic and I was afraid to release it by lifting the handle. I am thinking that it may unscrew using the allen screw. Any help is appreciated.

Great Condition, 1981 Schwinn Voyageur 11.8, Made in Japan, 4130 Double Butted Cro Moly 25" XL frame, Shimano Atlus LT front , rear derailleurs and down tube shifters. SR stem and handlebars. fork and head set included, Motobecane 3 piece alloy 2 ring crank set. What you see in the pictures is...

Hello, I have this Schwinn Fair lady that has a sticker that states it was made in Japan for Schwinn. The Head badge says Schwinn Chicago. Can anyone tell me what Japan company would have made this for Schwinn and what year it is from? From the 4 numbers(2536) on the head badge, I am guessing...

Did Raleigh make an internal gear hub 5 speed "Sports"? I found one for sale and I wasn't sure if it was custom or not. It is labeled "Sports" on the chain guard. I know the "Sprite" was available as an internal gear hub 5 speed.

I am trying to do my first rebuild of a Red Band Bendix Automatic kickback hub. The reason I am rebuilding it is, when in low gear, it would make a slight grinding noise and feel. The kickback did work, and when in direct drive, the grinding did not exist. When I disassembled, I did not...

Hello, I really did not know where to post this question, I hope this is the right spot. I have what I think is called a Klaxon Plunger Horn, that engages when the plunger is pushed down, but only makes a little noise like a duck call. My questions are: What is its official name? What is it...

Hello, I have what I believe is a 1946 Schwinn Continental but it doesn't exactly what I have seen on the internet for that model or year. It appears to be the original paint and decals and pin striping. It is a external 3 speed hub with a derailleur. Any help is appreciated.

1966-1968 Sears Spaceliner, 18.5" Chrome frame, single speed, coaster brake, spring action fork, ribbed vinyl seat with crash bar, rear carrier, working dual headlight/electric horn, kick stand. Will need tires. Located in Marengo,IL 60152. Local Pick up only * If driving to Marengo is...

Very Rare, Excellent condition, Sears 5 speed Screamer 1 Muscle bike, built by Murray in Ohio for Sears, designed after a Dragster race car, Slope down yellow frame with red over spray,, coil springs front and rear, rear tire 20" x 2.125" Cheater Slick, 16" x 1.75" mini front wheel, vinyl...

Local pick up only. Own a part of history, Huffy's 1980's Aerowind Phase One , Made in the U.S.A., custom aerodynamic narrow tubed frame and alloy Shimano Adamas AX components, 12 speed , 21" frame, built in kick stand, upgraded seat . Tan/Gold in color. Located in Marengo 60152. View this...

Hello, I have what I believe to be a mid 1950's JC Higgins 3 speed. The bike was poorly repainted (rattle can) in 1972, I would like to know if it is possible to remove the repaint paint without damaging the factory paint job? I spoke to the person who repainted it and they said they do not...

Hello, I wasn't really sure which forum to post this. Can anyone tell me anything about this seat in the attached photos? It has written on it "Special" Superior quality, Gents Model. I can find no information on the internet. Thank you

Hello, can anyone tell me what model and what year this Puch (Made in Austria), single speed, coaster rear brake, rod front brake, 700C/28" rims, is? I am guessing from the style of the reflectors, it is late 70's early 80's. Not sure if the seat is original or not but I like the looks of it...

Hello can someone tell me the year of this Campus Green Super Sport with a serial number of "F9134" ? Thank you

I know to most of you , this is a stupid question, but I picked up this Power King 3 speed (Made in Japan) and it was missing the seat post tube bolt, so I thought all I had to do is insert a bolt and tighten it up. As you can see in the pictures, there is no slot in the seat post tube to...

Hello, today I picked up a PowerKing 3 speed (Shimano 333 stick shift) bike. I mainly picked it up for the shifter. My question is, there is very little to no information regarding Powerking bikes online. What I have found online, is, that Powerking was a house brand for the E J Korvettes...

Hello, not sure if I am posting in the right area but, today I picked up this old Brooks saddle and was wondering if it can be salvaged? The leather is hard and misshaped. The leather is not torn or cracked. In addition, would you happen to know what model it is? Thank you

Hello, I just picked up a German, Rixe 20" girls bike and the rear tube has an unusual valve stem. It is not a presta or schrader style valve and I have no idea how to fill the tube.

"Like New" 1992 Schwinn Paramount(Kestrel) Series 9c, One Piece graphite/Spectra Intermediate Modular Composite Carbon Fiber Frame, Made in the U.S.A., 18 speed, Shimano 600 Group, Schwinn Computer, Profile Aerobars(arm rest), Blue Flash in Color. Tires are older but usable or change to your...

Hello, I just picked up a 1973 Raleigh Sports 3 speed, and I am suspecting the bottom bracket spindle is bent as the chainring does not run true. Visually, the chainring does not appear to be bent. The lock ring on the bottom bracket's adjustable cup, was also cross threaded. My question is...

Hello, I just purchased a 1991 Trek 6000 with Suntour Xpress accushifters and Suntour XC LTD derailleurs. I am having a hell of a time dialing in the rear derailleur. The problem is, after tightening the derailleur cable, I can get it to shift from 7th to 1st by tightening the barrel adjuster...

Hello I purchased a 1985 Raleigh Olympian and the rear brake was not mounted to the bike. It is a Dia Compe side pull brake, and what is unusual(at least for me) about the brakes on this bike is, they use a sleeve nut through the frame to mount the brakes. The sleeve nut is tightened with a 5mm...

Today I purchased a Blue in Color Specialized Road bike that is believed to be from mid to late 90's. I have tried using bike pedia to compare components with this bike but have failed to I.D. the model or year. The bike has the following: A1 aluminum frame,fork is Kinesis aluminum 6061 and is...

Can anyone tell me if the inside of a hub shell on a coaster brake bike is supposed to be smooth or serrated? I am working on a bike with a Falcon coaster brake. The hub makes noise when coasting but not when pedaling or as you apply the brakes. I have taken the hub apart numerous times ...

Hello, can anyone tell me what year this Univega Activa Trail is? It has all Shimano components. Shimano Atlus C10 derailleurs and crack set, and Shimano C15 shifters, shimano cantilever brakes. Araya alloy 700c quick release rims. 21 speed. Thank you

Hello, I was not sure which forum to write this in so forgive me if it is the wrong one. I just picked up a Bianchi Volpe ,which I believe is a 2008. The seat post is stuck in the frame. I have been soaking it for days with PB blaster with no success. The problem has compounded now, as I was...

Hello, I have a 1970's Ross Bike with the Shimano 3 speed coaster brake. I am planning on selling the bike but want to make sure it is shifting correctly. I asked my wife to try it as I am too big for the bike. From what she describes, it shifts fine when coasting or on a flat surface but when...

Hello, today I obtained a Giant Butte (probably too may sweets)Lol. The shifters are Shimano Total Integration, they have two paddles one for shifting up and the smaller one for shifting back down. When shifting, up, the front derailleur, it does move the chain to the larger chain rings but as...

Today I picked up a Columbia Trailhead 21 speed ladies mountain bike, I plan on flipping. The rear derailleur is trashed. The bike is from Sports Authority and they are no longer around so I am unsure of the year. I am looking for a derailleur on ebay and am unsure of which one to get. I do not...

Can you safely use a 26" x 1 3/4"- 2"1/8" tire, on a 26" x 1 3/8" rim, if so, can you still use the 26" x 1 3/8" inner tube? Thank you

Hello, I am trying to I.D. a lightweight Schwinn. I have not seen the bike in person only a photo. Here is what I know about the bike. It is light brownish in color, does not have suicide levers, has hoods and adjusters on the brake levers, shifters on the down tubes, quick release rims, Shimano...

Hello, I have a 1973 Schwinn Super sport that is missing the rear derailleur, as the bike was used as a fixed gear by the previous owner. I would like to convert it back to a 10 speed, therefore my question to you is: Is there anything special to a 1973 Super sport rear derailleur or will any...

Hello, I have a chance to purchase a Schwinn Girls 24" Flying Star. The bike is in rough shape mainly rust and is missing the front light and rear carrier. Can anyone give me a rough idea what the bike is worth in its current condition? Thank you

Hello Newbie here, today I picked up an old 3 Speed, JC Higgins bike (made in Austria) that I would like help with the model name and date of manufacture. The numbers under the crank housing are as follows(I think)503 46420 & 1507036(the 5 may be a 6). I found no other numbers on the bike. No...