Search results

This appears to be a 50's BSA. Jeweled pedals, functioning rod brakes, wrong size tires someone threw onto the rims for some odd reason. Beefy, beefy, I mean BEEFY, front stand and basket holder. Brooks saddle, sad repaint. I will include a giant vintage wicker basket that fits perfectly into...

I am being told that this is definitely a teens bike rather than early 20's. But I added a pair of true 28" steel clinchers from a mangled 22 Crusader. Luckily , 27x1-1/4 tires fit. The original 28" tires for these would have the same ID, but slightly larger OD. The grips were carved by someone...

1939 Westfield Peerless badged. Badge says Peerless, everything else says Columbia. Is a "Custom Deluxe", as screened on the downtube. Tank is not original, but is a close match done with several shades of paint, distressed and with real rust coming through. So far, nobody has noticed that it is...

This is a 36 Mead Crusader with Carlisle whitewalls. Pretty nice rider, probably currently my favorite to get around on.. Seat is worn. Probably could use cleaning overall. I think the paint would come back red with some cleaner polish. Tank is nice and clean, all the graphics are fair. Has the...

Over the years, I would keep bolt-on kickstands because I always have one to fit any build. Now it is time to make some room. The 8 on the right are WALD. On the left is an Atwood, a Greenfield, and some unstamped stands off of older free-spirits and stuff like that. It would be difficult to...

There is some rust but also still has a lot of the original black paint, and what looks like possibly an original screw with the low-profile head and square nut. Glass is very nice, clean, no chips. Don't see any visible scuffs, scrapes or scratches on the lens either. Stamped WALD MFG. CO. INC...

In good shape. Post on back is solid, has good threads and so does the securing nut. Over all diameter is a little over 1.5", visible glass diameter is about 1-3/8". $37 shipped

I really like it. It can fold down to act as a normal rack, or fold upwards to hold things inside. It reminds me of the produce basket racks like a friend of mine has on the back of his cycletruck, except his is round and doesn't fold or anything. Anyways, I just want to know more about it. I am...

No idea what this is really for, bike, car, motorcycle? It would look great on the rear fender of a bicycle. Especially if your bicycle is a 1932. Latin script: SPES MEA IN DEO EST Edit: just checked the translation "My hope is in god" $32 shipped

"A" is an Eagle lock with key. Key say Eagle as well and letters NMCKC. $30 shipped "B" is a CYCLOC. $40 shipped ***SOLD*** Both locks work as they should

Have two available. Both have minor wrinkling on the ears as you can see in the pics. I thought about putting them in a vice between two flat pieces of metal, but I will let the next owners try. "A" does not say Goodrich, and the reflector has cracks, but the pieces don't move and I can't see...

This has old original cloth-covered wire in poor shape. As a result, while testing the bulb (which initially worked) the exposed hot wire contacted the mount, blowing the bulb. So you will need a 6V bulb and some wire. But the mount is really cool. Has a rusty visor which has a spot for a...

Like the title says. Pretty basic equipment.UPDATE: I found the front extension. It has the multiple holes on each side to adjust it to fit any bike. So that is included now. Just needs the screws that hold it to the front of the rack. I will remove the screws that hold the lower braces together...

I believe this is correct for some prewar Iver Johnsons. I just think it is a good option for any bike that you would like to put a rack and stand on. Especially if you frame doesn't have the ears for a stand. Screws are likely not correct. I have only seen one in person other than this one, and...

I have searched this site and other online resources to try to determine pricing. They don't come up for sale too often in any condition, so there wasn't much in the way of recent sales to base it on. But if sales over the past years in relation to condition is any indication, then I think I'm...

I am looking for a prewar 20" front fender with the flat braces. Painted preferred over any kind of plated or stainless/aluminum. Need deep rounded style, not raingutter or anything fancy. Nothing too dented up or rusted out, but condition doesn't need to be too amazing. It's going to get...

Like it says, I'm looking for a Raleigh Parcel Carrier. Will consider any degree of completion or condition. I guess this is a bit of a longshot. But they are definitely out there. I've seen a few at local shows, but nobody really wanted to get rid of theirs. Let me know if you have one you'd...

Hello. I picked up what is likely a late 30's Roadmaster Cycle Truck, or delivery bike, or whatever the correct name is. I have been all over the net looking for info, but not much is out there. Any images are of repainted or badly rusted bikes, or containing lots of incorrect parts. I'd really...

This frameset is in good shape, no bends or breaks and ribbed fork is straight. Badge looks to be in pretty good shape as well.For 28" wheels. I purchased this to build up but it is a bit tall for me. I will try to get measurements shortly. It is a repaint, but must be an older one because the...

Paint is good, inside is clean, decals look nice. Has the two small dents on the front sides from trusses. Has some paint rubbed off where the frame was and where battery can straps were touching, and some spots of rust. I have not tried cleaning or derusting in any way, so hopefully it can look...

Obviously, it's worth what someone will pay. But I'm not neccessarily dedicated to selling it. I'd like to find out more about it, given the differences in parts on some Orioles. Provided are the pics I've had posted already, and a link to more detailed pics. I'm not sure if the serial numbers...

Well, this is going to be the definition of a longshot... but you never know. So please don't be harsh. I'm not stupid, just hopeful. I am in need of a highwheeler with a 48"-50" wheel. My current ride is a 52". I can ride it fine but I think it is just slightly large. I intend to start riding...

I picked this up cheap at a flea market pretty close by. It is rough. The back wheel was pretty badly bent. I have since been working on it and am making progress. I'm just going to disassemble and do some detailed cleaning and get it riding. Nothing exciting, but I don't often get chances to...

I've got quite a few things to list, so I'll try to keep it flowing. I'll do a separate post for each item so I can delete the ones that sell.

Can't remember which but this came from a 35 or 36 straightbar. For 26" A little bit of looseness at the ears but just barely, probably not enough to even mention. But I've never had a NOS one so I don't know how tight the rivets were in the beginning. $125 shipped

PERSONS NO. 219 reflector set $85 shipped The red is a bit rougher than the amber one. It has some scratching and a couple of minor dings around the rim of the housing. Also the base spins in the housing, but is not coming out. There is a bit of silver paint on one of the marbles, but the...

This is a 60's repro, but as the same principle applies I am posting here. I am helping a friend with a high wheel. The previous owner had taken it to a local museum/shop for tire replacement, as there was a gap at the tire seam. Fortunately (I suppose), a little wd40 around the tire allowed the...

This is about as nice as any I've seen. It has a small area of peppering that is barely noticeable. A couple tiny nicks maybe or faint scratches. The only noticable scratches are where the race tightened against it and where the outer crank arm seated against the chainring. I had hoped to find a...

Received this basically complete but in pieces. Going through derusting, cleaning, oiling before I put it all together. Needs a front tire. Chainguard paint is pretty far gone, but I'll see what I can do.

Like it says, I'd like to purchase a 20" Trelleborg whitewall tire. Tread pattern isn't important. And I'm sure this next bit is a shot in the dark, but a 24" whitewall Trelleborg would be nice to find as well. Please let me know if you can help. I have tons of trading fodder too, if you can...

mead, colson, higgins badges, skiptooth chain Ranger badge: $40 shipped Packard badge: $25 shipped packard has paint left on it but I haven't tried to clean it, looks like the red might show up better if carefully cleaned

In case anyone is building a Schwinn motorbike and needs the correct stuff for it $115 shipped on this set

I have had this for a long time and used it on several different projects. I usually try to research on here and CL before I part with something. I have only seen an older version which was rustier. I'm guessing this one is late 40's-early 50's. I'd like any info and ideas on value. Unseen in...

trying to find one of these

Nice patina, still has remnants of the red and blue paint.

Colson drop stand someone painted black. I put it on a black bike so I never bothered taking off the paint $55 shipped Schwinn bow pedals: $15 shipped Prewar chainguard: $30 shipped Lucky 7 seatposts: $15 shipped each Straight solid seatpost, has tabs on front and back to fit into grooves...

The seat obviously has no material left on it. It is single pan construction with a metal band (which has some breaks in a couple spots) that the material would be stitched to. The pan is extremely solid and a bit thicker than many similar seats I've owned. It is a Lobdell and Emory seat which I...

I find that in order to partially fund a vehicle purchase, I may be required to convert this bicycle back into the parts from which it came for individual sale. However the bike has been in this particular incarnation for some time and I am not up to date on values of some of the parts...

I have an original white set with no cracks or chunks missing, but they do have some age discoloration and some fine blue paint specks. I also have 2 repro sets in black. Set 2 is near perfect and set 3 has a slight scuff, very minor, on one side of one end of one grip. Asking $22 shipped on...

I pulled apart a 36 Schwinn motorbike a while back and still have this guard around (the blue one obviously). I didn't find any examples on ebay at the moment to watch. Any idea what the range is on these? I've seen them sell in the past but they are usually not painted ones.This one has a ding...

I don't know much about this bike. I'm guessing at least 1920 or earlier. Crank has a shape that fits the inside of the chainring so no locator. Has the cool pedals, block chain, fixed gear. Badge is missing, no mfr. info on the hubs that I can see. Seat is holding up nice but needs the...

OK, so I went to look at a bike under the assumption that it was an Indian. It is actually a Pierce Arrow. The badge says Arrow but other stamping with "Pierce" and manufacturing info is worn to almost not visible. Not really the sellers fault, he apparently thought Arrow was an Indian thing. I...

Speaks for itself. Removed from a mid 30's model. Remnants of the red and white still there but not much. Someone in the past painted the bike with housepaint. They kept it off of the badge but let some drip behind I guess. So you will want to clean the back of the badge a little $22 shipped

This tank is obviously repainted. It has a couple shallow dings. The horn worked when I was riding the bike last year. I opened the tank and batteries were slightly corroded. Can't get the horn to work now but none of the battery corrosion got on the contacts so no idea what's up with that. I...

I have a stingray light. $25 shipped. The outer shell has patina, not sure how it will clean up. The inside looks pretty clean. No idea how to test it I don't know what kind of bulb or where batteries go. But the contacts on the 4-way switch are very clean. Only rust inside is on one screw but...

Sunday, October 28th at Sonic Drive-In and the new 15 Beans Coffee Shop at 697 West Independence Blvd. Mount Airy, NC Show takes place 11am-5pm. I'll be there earlier and later as always. Awards in the following categories: Balloon, Middleweight, Lightweight, Rat Rod, BMX, and...

I know, I know. This probably pops up once a week. But I need a straightbar schwinn tank(like everyone else). The difference is that I need one in rough condition. Paint and rust I can sand. Holes I can weld. Dents I can knock out. But a nice tank, I cannot afford. The bike it is for is really...

I guess this is a local sale since shipping would be difficult and expensive. I'd like to sell my old Huffy Daisy Tandem. The seats were repainted (just the red) with vinyl paint, and it has held up well. The frame paint is mostly original. The fenders were added. Wheel and parts chrome were...

I think I saved this pic from somewhere on the cabe. I'm hoping someone could post better pics and close-ups of the color. I'm thinking of repainting my 48 in this color scheme. Thanks for any help.

Well, I come across many of those prewar Schwinn badges and I'm curious what the rarity of each is and maybe what level of bike they would be attached to. It seems like the high-end models used more of certain badges and the economy models used others. Here's how I place it so far as I can see...