I recently picked up this early Iver frame with some unusual (to me) features. After looking through the 1901 Catalog, and because it has a 24" frame, I believe I've identified it as a Model 68 Men's Roadster. It has a great snowflake chainring and a heavy block chain.
View attachment 299827
The area on the frame where the chain adjuster threads through is smaller than more modern Ivers as are the chain adjusters themselves.
View attachment 299828
The seatpost has a collar and adjusting nut to tighten it on the seattube.
View attachment 299829
The left pedal arm has these two small screws next to the lock nut. I don't think the BB is original to the bike. The locknut shows evidence that it was once removed. The drive on the chainring is round, not rectangular as the more modern Iver chainrings.
View attachment 299830
The front tube clearly shows where the Iver Johnson badge was and the mounting holes for the badge line up perfectly. Notice the "flush" look of the top and bottom cones.
View attachment 299831
There was only one pedal on the frame and it has a "star" in the center.
View attachment 299832
Now here is where it gets interesting to me. Notice the low serial #, check out the paragraph in Bill Smith's page concerning the approximate years/numbers, this # is quite low. Also, what on earth are those cross hatches next to the serial #. None of this information was visible until I took off some paint. Could the marks have been factory applied? Might they mean something?
View attachment 299833
In any case, it's an interesting find. I may be interested in trades only for a similar frame with 1900/01/02 BB intact.
Pete in Fitchburg