You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
The front fender should have a ferrule for the wires from the tank. The bottom side of the front fender should have a little clamp to hold the wire from the silver ray securely in place.
Yes, same principle using a tube. The two tubes I pictured are actually spot or tack welded to the "door" or closure plate from the factory. I have seen, but do not have pictures of, another one which was the more conventional 4-battery "rack" also tack welded the the closure plate. Perhaps, a later model. (my guess)
What about extra hole on rear fender above rivets about 4 3/4. from stays? Is that for a mouse light. I thought I had finished this puzzle last night ....
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.