tryder
I live for the CABE
This is what I have:
The brackets are bent out. They are supposed to be flat and parallel.
I measured the lower portion the best I could.
The distance for the small: approximately 1 1/4" - 1 1/2"
The distance for the large: approximately 2 1/4" - 2 1/2".
I will have to flatten them at some point.
The pins will need to be a bit longer.
This is what I need:
For both sides of the tank:
Bottom three photos taken from a posting by Krakatoa on the cabe.
Thank You.
The brackets are bent out. They are supposed to be flat and parallel.
I measured the lower portion the best I could.
The distance for the small: approximately 1 1/4" - 1 1/2"
The distance for the large: approximately 2 1/4" - 2 1/2".
I will have to flatten them at some point.
The pins will need to be a bit longer.
This is what I need:
For both sides of the tank:
Bottom three photos taken from a posting by Krakatoa on the cabe.
Thank You.
Last edited: