#7 Torrington Pedal Part(s) needed, TOC ? (>X<) Bat Signal...help


This ad disappears when logged in

Tyberius

Look Ma, No Hands!
Aug 13, 2018
25
35
45
Annapolis MD
#1
Sending up the Bat Signal hoping that a CABEd Crusader can come through for me. I'm cleaning up a set of #7 Torrington pedals to use on a rider. The right one is fine and should go back together nicely. The left one has an issue. The outer bearing cone/nut must have gotten out of wack at some point in its history and has deformed over time and also worn away the threads of the axle.

If I had a replacement cone/nut I think I can pack in some extra washers and make it work so that's what I'm most interested in. That said, if someone had a 1/2 LEFT axle with better threads I could be keen on that too. I'm not sure if the cone/nut was used on other pedals. This one is 1/2" in diameter and I think the threaded portion of the axle is 7/32".

Guess I wouldn't say no to a pair in better condition as these if anyone feels like selling me them.

Anyway...signal is up. Thanks!

IMG_4482.JPG


IMG_4481.JPG


IMG_4480.JPG
 

mrkmcdonnell

Finally riding a big boys bike
Apr 3, 2013
142
120
New Jersey, United States
#3
I may have NOS L axle and hollow body replacements if you need. No nuts or cones though.

These axles, nuts and cones were widely used on various Star, Bridgeport and Torrington pedals.

I'll let you know ASAP.
 

mrkmcdonnell

Finally riding a big boys bike
Apr 3, 2013
142
120
New Jersey, United States
#6
Sending up the Bat Signal hoping that a CABEd Crusader can come through for me. I'm cleaning up a set of #7 Torrington pedals to use on a rider. The right one is fine and should go back together nicely. The left one has an issue. The outer bearing cone/nut must have gotten out of wack at some point in its history and has deformed over time and also worn away the threads of the axle.

If I had a replacement cone/nut I think I can pack in some extra washers and make it work so that's what I'm most interested in. That said, if someone had a 1/2 LEFT axle with better threads I could be keen on that too. I'm not sure if the cone/nut was used on other pedals. This one is 1/2" in diameter and I think the threaded portion of the axle is 7/32".

Guess I wouldn't say no to a pair in better condition as these if anyone feels like selling me them.

Anyway...signal is up. Thanks!

View attachment 931096

View attachment 931097

View attachment 931098
I Have a left axle and several hollow bodies if you need any. NOS but suffered a bit from poor storage. Axle 3 3/4", body 2 1/16". $40. Each shipped.

20190115_184320.jpg
 

This ad disappears when logged in
Most Recent BUY IT NOW Items Listed on eBay
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture