fordsnake
I live for the CABE
Latta Bike
I recently won this Latta Bros., bike on eBay…at the time the seller didn’t have any history on it since the bike didn’t have a badge on it.
Because the seller didn't have a clue as to the maker and he couldn’t remove the hanger, hence him selling it!
At first my research led me to think it was a TOC Ben Hur? It’s similar in appearance, but the tubing, fork and chainring seemed different?
At first glance the hanger looked like any other one-piece crank arm, but it isn't! There are no pins or bolts to hold the arms on. At first I quickly felt the pain of the seller...his frustration as to how to remove it? I tried a pulley, but had no luck…then I noticed the crank arm had a sleeve that slotted over the center of the sprocket. So I thought, is it possible that the chainring screwed on? Sure enough, by unscrewing the chainring the crank arm slowly slid off the slotted post…a genius of an idea!
The crank is stamped Latta. Nov.9, 97 BINGO! This is what I needed to discern the maker...I now had the piece of the puzzle as to the manufacturer.
With the name Latta...I began a deep dive, it turned out the name belongs to the Latta Bros of Friendship, Allegany County, New York, and they were no joke when it came to building bicycles!
The crank arm was one of Emmit G. Latta many designs...the fact is E. G. Latta made scores of patents for bicycles, more than any one man. Over 80 patents were granted on his bicycle inventions. Latta sold many of his patents to the Colonel Albert Augustus Pope, of the “Pope Manufacturing Company,” the leading US producer of bicycles. There was not a bicycle made at the time that did not contain some of his inventions.
Here's a interesting back story on Emmit Latta, he apparently “came from a line of distinguished soldiers in all the Colonial and Indian wars”. He received a common school education, and during the Civil War, in 1864, when but 15, he enlisted in the US Artillery without his parent's consent (the military forbid young men under the age of 18 to join).
Latta's father, Samuel E. Latta, wrote to President Abraham Lincoln, and obtained a special order to discharge the young Emmit. Latta was immediately discharged, but after two months at home, he re-enlisted again and served until the close of the Civil War. After the war, he enlisted for a third time and served a full term in Company A, 4th U.S. Infantry, where he spent his time as an engineer, helping to locate the Pacific railroad through the Rocky Mountains and exploring the Yellowstone and Black Hills region before the discovery of gold. He was twice wounded by Indians.
He finally left the service in 1869 and returned home to Friendship, New York, where he established himself as an entrepreneur and an inventor, patenting scores of inventions.
Here’s another one of Emmitt’s accomplishments ... the typewriter! E.G. Latta may be regarded as being one of the greatest typewriter inventors of all time. Among his 176 patents, beginning in 1881, 58 were for the typewriters or typewriter parts. [url]http://oztypewriter.blogspot.com/2011/07/on-this-day-in-typewriter-history-xlii.html[/URL]
Brother Adrian C. Latta, was no slouch either in the patent department, he made several contributions also. Among those coming into general use was the twisted barb wire fence, twisting together two wires and inserting barbs.
I recently won this Latta Bros., bike on eBay…at the time the seller didn’t have any history on it since the bike didn’t have a badge on it.
Because the seller didn't have a clue as to the maker and he couldn’t remove the hanger, hence him selling it!
At first my research led me to think it was a TOC Ben Hur? It’s similar in appearance, but the tubing, fork and chainring seemed different?
At first glance the hanger looked like any other one-piece crank arm, but it isn't! There are no pins or bolts to hold the arms on. At first I quickly felt the pain of the seller...his frustration as to how to remove it? I tried a pulley, but had no luck…then I noticed the crank arm had a sleeve that slotted over the center of the sprocket. So I thought, is it possible that the chainring screwed on? Sure enough, by unscrewing the chainring the crank arm slowly slid off the slotted post…a genius of an idea!
The crank is stamped Latta. Nov.9, 97 BINGO! This is what I needed to discern the maker...I now had the piece of the puzzle as to the manufacturer.
With the name Latta...I began a deep dive, it turned out the name belongs to the Latta Bros of Friendship, Allegany County, New York, and they were no joke when it came to building bicycles!
The crank arm was one of Emmit G. Latta many designs...the fact is E. G. Latta made scores of patents for bicycles, more than any one man. Over 80 patents were granted on his bicycle inventions. Latta sold many of his patents to the Colonel Albert Augustus Pope, of the “Pope Manufacturing Company,” the leading US producer of bicycles. There was not a bicycle made at the time that did not contain some of his inventions.
Here's a interesting back story on Emmit Latta, he apparently “came from a line of distinguished soldiers in all the Colonial and Indian wars”. He received a common school education, and during the Civil War, in 1864, when but 15, he enlisted in the US Artillery without his parent's consent (the military forbid young men under the age of 18 to join).
Latta's father, Samuel E. Latta, wrote to President Abraham Lincoln, and obtained a special order to discharge the young Emmit. Latta was immediately discharged, but after two months at home, he re-enlisted again and served until the close of the Civil War. After the war, he enlisted for a third time and served a full term in Company A, 4th U.S. Infantry, where he spent his time as an engineer, helping to locate the Pacific railroad through the Rocky Mountains and exploring the Yellowstone and Black Hills region before the discovery of gold. He was twice wounded by Indians.
He finally left the service in 1869 and returned home to Friendship, New York, where he established himself as an entrepreneur and an inventor, patenting scores of inventions.
Here’s another one of Emmitt’s accomplishments ... the typewriter! E.G. Latta may be regarded as being one of the greatest typewriter inventors of all time. Among his 176 patents, beginning in 1881, 58 were for the typewriters or typewriter parts. [url]http://oztypewriter.blogspot.com/2011/07/on-this-day-in-typewriter-history-xlii.html[/URL]
Brother Adrian C. Latta, was no slouch either in the patent department, he made several contributions also. Among those coming into general use was the twisted barb wire fence, twisting together two wires and inserting barbs.
Last edited: