Anyone know the ERD for Noah Stutzman's wood rims

[gtdohn]

Those are the ones I needed, THANK YOU!

 

[oddball]

@gtdohn , did you lace the Stutzman rims?
I laced a pair with ND model A & M with erd of 615 or 616 and spokes were too long. Went back and measured erd at 610mm, haven't recut spokes yet. Has anyone laced the above hubs with Stutzman 36 hole rims with the inserts?
Cliff

 

[gtdohn]

@gtdohn , did you lace the Stutzman rims?
I laced a pair with ND model A & M with erd of 615 or 616 and spokes were too long. Went back and measured erd at 610mm, haven't recut spokes yet. Has anyone laced the above hubs with Stutzman 36 hole rims with the inserts?
Cliff

Cliff, I laced some Noah rims with a ND Model A and the spokes were 298 mm. The fronts were laced to a 32 hole hub and they measured 302 mm.
I used the 615 as ERD on both calculations.

 

[oddball]

That's about the size of my spokes and they were too long, used 7/8" nipples

 

[gtdohn]

That's about the size of my spokes and they were too long, used 7/8" nipples

I used 1" nipples. I don't think that would make any difference.

 

[gtdohn]

Here is the spoke length calculator that I use: https://arnowelzel.de/en/tools/spoke-length-calculator