You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
one downside of staying with the original Tourney chainset for a single plateau drive train is that one is limited to the 52T chainwheel
usually for single plateau folks want to select something in the mid forties for a dentition
mounting instructions from the manufacturer suggest on these slant pantograph rear mechs to adust the angle such that the pantograph is parallel to the chainstay
stem binder has been replaced with a hardware store item. did the original fail?
one downside of staying with the original Tourney chainset for a single plateau drive train is that one is limited to the 52T chainwheel
usually for single plateau folks want to select something in the mid forties for a dentition
mounting instructions from the manufacturer suggest on these slant pantograph rear mechs to adust the angle such that the pantograph is parallel to the chainstay
stem binder has been replaced with a hardware store item. did the original fail?
I set my gear ratio around the 52, which I’m quite used to riding 52s.
the derailleur is set up right, but I probably should invest in a chain guide.
I misplaced the original stem bolt so I got one from the hardware store lol, probably beefier than original
Well you’re not really supposed to use the lowest gear for just cruising, it’s much better suited to downhill and when you have serious momentum. I built it as a commuter/ delivery bike for college, so I’m probably a little bit more capable than almost cabers lol
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.