When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Confused Build

-

island schwinn

Riding a '38 Autocycle Deluxe
Little of this,little of that. Just about done with mock up and then tear it all apart for powder coat. Mix of parts. Schwinn,Shelby, Western Flyer, CWC, Elgin.
20190909_013931.jpg


20190909_013856.jpg
 
Get some 1” ID spacers for your steering tube gape or a tubing piece to fill the gap.


Sent from my iPhone using Tapatalk
 
dont know thes forks well. maybe chop the lower part of upper fork rods and have the upper rod bracket sit on the bearing race then hack saw the excess steer tube? again i dont know these forks but if not a good spacer should be ok.
 
Back
Top