When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

early shelby

-
This last illustration is just kool ... hope ya dig it as much as i do ......


..................... patric


View attachment 171411


====================================
====================================

Wonder if this badge is for that motorcycle? Thoughts? V/r Shawn

$T2eC16R,!w0E9szNYh(pBRuJhVZOQg~~60_57.jpg
 
spacer
Using an appropriate fiber/woven/abrasive end-cutter on your Dremel or your Foredom ... CUT THE COWCATCHER OFF THE TANK.

Your measurements need to be accurate.

Use an index-card to design a working-pattern of the repair / filler-piece.

When you are satisfied with fit ... transfer this index-card information to a piece of suitable sheet-metal.

Do not do anything heroic. Measure, then check your measurements -- before any scoring, clipping and
bending of the sheet metal.

When you sense your accuracy ... clean everything with lacquer-thinner and attach the filler-piece in
a manner that makes it obvious you respect what you're working on.


.... patric





McCauley 1935.c Catalog pg-11  bb.jpg



McCauley 1935.c Catalog pg-11  cc.jpg




=========================
=========================
 
Last edited:
Back
Top