You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Going through my stash and thought I would share a couple 1 1/8” seatposts for posterity.
Both very cool proprietary quill designs, the first has a full insert that acts as the quill. The second has a great built in seatpost clamp and built in shim at the center of the seatpost itself.
I think this is the best pic of the post I was/am looking for:
I found this one which is a close match design-wise, but it is only 1" diameter and the angle is wrong.
There is a kind of frown where the post meets the rail.
It might very well belong on a shorter Crescent frame with different frame geometry.
However, the rail on this is tubular, not solid as described in the catalog page.
I found another 1" with a better angle (rail is parallel to top bar) and decided to fashion a shim to make it work.
This rail is tubular also, not solid as described in the catalog page.
I appreciate the efforts.
I think I'll stick with that one until I find a 1 1/8"-er that matches the design in the illustration.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.