stingrayjoe
Cruisin' on my Bluebird
I have done some searching on the www but do not see this exact frame design. In particular the bottom bar design and how it is attached to the seat tube and down tube. The fenders were on the frame. The truss rods may be wrong or possibly bent. They do not line up with the brackets when mounted and positioned at fork holes for the axle. The headbadge screw spacing is 1-7/16" center to center using a soft tape measure. They are positioned left and right. The frame is 19-1/2" tall.
Any information would be greatly appreciated.
Thank you.
Any information would be greatly appreciated.
Thank you.
Last edited: