Help schwinn tiger date

[randallace]

This help ?

 

[randallace]

The front forks have a bolt in them to hold on the front fender

 

[GTs58]

Thanks for the extra pictures. That solidifies my previous post on the stem. Schwinn for the most part did not install a drilled fork on a coaster bike so I'd guess that Tiger was originally a geared bike. Coasters had a non drilled fork and the fender attached with a screw into the bottom of the fork.

 

[randallace]

So this wAs most likely a Sturmy archer 3 speed then ?

 

[randallace]

So it is a schwinn stem then - any clue on the bars ? I know the grips are from a later time also. ( my brother thinks from a dirt bike )

 

[GTs58]

So this wAs most likely a Sturmy archer 3 speed then ?

Judging from the rear fender mounting bracket and the drilled fork, I'd say it was equipped with the Bendix two speed manual.

Can't really get a good angle on the bars but they might be the steer horn #7800 or the Boy Scout #7806. If they are later Schwinn issue there will be a date and part number stamped in the mounting area.

 

[randallace]

Will get more pix and look for the numbers thanks so much for your help !!!