Help with 1936/7 Schwinn model C badge ID

[Addison 35]

Hello everybody, I have a recently acquired 1936 or 1937 Schwinn model C and it is missing its original badge. However it is in a standard badge from the era and because of the almost perfect circle footprint left by the original paint I am at a loss of what it could be. It has horizontal screws, and is roughly the size of a mead Ranger badge or me crusader but Lacks the little tabs on the left and right side. Nor is the bicycle marked with Mead Ranger decals. Any help would be greatly appreciated.

Sent from my SM-G930T using Tapatalk

 

[barneyguey]

There were a few different ones I know of.

https://thecabe.com/forum/attachmen...=141311&hash=d06120478c97b89a4a6c91e47a08f913

 

[Addison 35]

There were a few different ones I know of.
View attachment 887061
View attachment 887062

View attachment 887063

View attachment 887065

View attachment 887074


https://thecabe.com/forum/attachmen...=141311&hash=d06120478c97b89a4a6c91e47a08f913

Those seem to be pretty hard to find. Any chance of a link one that would fill the spot?

Sent from my SM-G930T using Tapatalk

 

[barneyguey]

Those seem to be pretty hard to find. Any chance of a link one that would fill the spot?

Sent from my SM-G930T using Tapatalk

I don't know, you'll just have to keep an eye out until one pops up.

Sent from my SM-G530T using Tapatalk

 

[Addison 35]

I don't know, you'll just have to keep an eye out until one pops up.

Sent from my SM-G530T using Tapatalk

Is this a Schwinn branded badge? Just slightly bent.

Sent from my SM-G930T using Tapatalk

 

[fordmike65]

Is this a Schwinn branded badge? Just slightly bent. View attachment 887173

Sent from my SM-G930T using Tapatalk

Seen those on Snyder built bikes.

 

[GTs58]

Well how about this one Barry?

http://rover.ebay.com/rover/1/711-5...0001&campid=5335809022&icep_item=173594009695

 

[bobcycles]

Those seem to be pretty hard to find. Any chance of a link one that would fill the spot?

Sent from my SM-G930T using Tapatalk

Looks like it could be the standard Schwinn oval badge profile....Anything from The World, Excelsior, Packard, Electric etc

Electric version is an easy find if you check ebay

oops ....horizontal screws...


Neverrrrrrrr mind....

 

[barneyguey]

I've never seen one of them on a Schwinn. Barry

Is this a Schwinn branded badge? Just slightly bent. View attachment 887173

Sent from my SM-G930T using Tapatalk

Sent from my SM-G530T using Tapatalk

 

[barneyguey]

The Schenley is way too small, probably half the size of a Ranger badge.

Well how about this one Barry?

https://www.ebay.com/itm/Schwinn-Sc...009695?hash=item286b02605f:g:Jm0AAOSwtbxbr9Il

View attachment 887236

Sent from my SM-G530T using Tapatalk