You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Would like to remove this bottom chrome part of the front fork for repainting. I’ve carefully tried to unscrew the bearing cup and it’s not moving at all.
I would try tapping gently at first into the seam with a H/D putty knife/scraper or maybe a wide(thin) bladed screwdriver (may damage either cover or race slightly). I usually go side to side and it should work it's way upward. some of these are loose, others a press fit.
Thanks fellas for the tips. I used Stig’s method of heating the area which worked great. The grease was like glue holding the parts in place but released once heated up.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.