How do i save this hub?

Most Recent BUY IT NOW Items Listed on eBay
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
eBay Auction Picture
These ads go away when you register for an account!

buickmike

I live for the CABE
May 26, 2014
1,207
Hammond Indiana
Get a pair of crescent wrenches and have at it.
 
Last edited:

Brutuskend

I live for the CABE
Apr 3, 2011
1,257
Eugene / Springfield Oregon
I have one of those with a bent flange as well. As hard as they are to come by. I WILL fix it one way or another. My one thought so far is to take two boards, cut two notches in the edges of both of them, clamp the hub between the two boards with the hub shell in the middle then nail other boards to the top and bottom to hold everything together and go at it with a mallet.
 

buickmike

I live for the CABE
May 26, 2014
1,207
Hammond Indiana
This is how I did it. Although the wrenches flats were taped off-the placement of tool is centered over the "cutout. The spokes are preventing the wrench from covering cutout completely. GL.

IMG_20190724_064453.jpg
 

Mr. Monkeyarms

I live for the CABE
Oct 30, 2018
1,035
Colorado
Yep, with a bare hub, a vice and a couple crescent wrenches would have that flange straight in no time.
 
This ad goes away when you register for an account!
This ad goes away when you register for an account!