It's been about a week now that the bike has been running,there has been a few minor issues.first i couldn't get it to idle,so i advance the cam one tooth,that help but still not able to idle.the barrow at the end of the throttle cable was pulled in about 3/4"on the carb side.fix that but still no idle on it's own.the adjustment at the other end,handlebar side was all the way out for the highest idle,same problem with this end,throttle cable pulled inside the adjustment.VOILA!!! she now idles.timing is set at 14 degree from factory but can be moved to 28 degree by moving the trigger plate forward.the carb main jet went from#80 to#85 with the needle jet set at the 4th groove from the bottom.may have to go to a #88 .the temperature went from the high 500 F to about 300 F BIG DIFFERENCE with heat coated parts.will have to run the motor for a few more hundred miles to see the final out come.time to have fun. Ray