You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hello,
I'm hoping someone here can help. I'm trying to disassemble an old wagon (murray I believe) but I'm having issues removing the wheels from the axel. Ive attached a photo of the rim, ive already removed the hubcap.
Tabs for hubcaps on backside of wheel
Bend slightly back and remove hubcap from front
Or
If no tabs on backside
Flat screwdriver slid gently under hubcap shimmy and raise hubcap out and off wheel
There should be 2 or 3 small tabs on bottom of hubcap snapping into wheel.
Slide screwdriver under Cap in different locations not only one area. Work your way around
Might even see 1 single small slot to insert small screwdriver
I was able to remove the hubcap however I'm having trouble pulling the rim off the axel. I've removed the nut but the rim seems to be sitting on a piece that has small lip on both sides of the rim that keeps the rim from sliding up and down the axel. I've included a photo for your reference.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.