Because it has been a while ago since my last post.
Here some pictures of the progress, so far.
The regalvanised parts.
I think, maybe it's wrong that i have the fronthub galvanised.
But it didn't look chrome when i cleaned it up, that's why it's galvanised now.
Rechromed parts, also back in tha house.
The strange part on the left side of the tombstone housing, is a home made light hook.
I'm gonna use that for mounting a european Bosch headlight to the bike.
This is a light wich i could accept to go on the bike.
I would prefer a Delta headlight, but the prices on these ones are outrageous high.
That would just get to expensive, to get one over to The Netherlands.
After sanding the epoxy primer with dry sanding paper p320.
And the use of a little bondo on the front fender.
The parts were ready for a coat of filler.
After the parts were sprayed in the filler.
Sanded them again, this time with waterproof p1000 sanding paper.
After that, some parts needed some primer here and there.
It's hard to see, but the frame is sprayed in filler and sanded again.
Some parts were sprayed with primer several times, and sanded a few times.
Until i was satisfied.
Here the frame is ready to be painted.
Because of to many pics see next post.