Mark iv hub

[Overhauler]

i am looking for a diagram of the 1960 MARK IV hub
who was the maker ?
and also it has an oil port ...... what kind of oil / grease was used ?

 

[cruiserbikekid]

That hub was made by a company called Perry. There are lots of them out there with the Perry name it should be easy to find info on the web

 

[OldRider]

If thats a Perry hub why would the arm say Schwinn Approved? Perry was a British outfit..... what am I missing here?

 

[cruiserbikekid]

I tell you it's one in the same. The end of the axle is square for cone ajustment and the brake arm is the same as a perry. I know they are british and dont know when they started to use them but I have seen them before on Schwinns with the schwinn logo and the perry.

 

[Freqman1]

These were standard on the '59 Phantom which, I believe, is the only year they were used on this model. v/r Shawn

 

[OldRider]

Thanks for clearing that up guys, I had no idea Schwinn used Perry hubs.......I thought I was seeing things

 

[Overhauler]

These were standard on the '59 Phantom which, I believe, is the only year they were used on this model. v/r Shawn

This hub is on a 1960 Speedster

 

[Boris]

Also on a '59 Hollywood